Harbor Freight Tools 55167 Specifications, General Safety Rules, Save This Manual, Work Area

	Specifications
Welding Current	63 ~ 68 amps; High setting: 79 ~ 90 amps
Duty Cycle	10% at 80 amps; 18% at 60 amps
	(See explanation of Duty Cycle on page 15.)
Power Consumption	120 VAC, 24 amps peak, single phase
	Should be connected to a 20 amp minimum dedicated circuit
Heat Control	2 settings
Ground Cable	6 AWG, 6 foot
Torch Power Cable	8 AWG, 6 foot
Power Cord	3-wire, 14 AWG, UL listed
Welder Tip	Included tips will accept 0.030” flux core wire
	(0.9 mm tips, to account for thermal expansion of the wire)
Wire Size	0.030” flux core wire
Wire Spool Size	4” diameter/ 2 lb. spool
Overall Dimensions	14-1/2 (L) x 8-1/2 (W) x 15-1/2 (H) inches
Weight	34.45 lb.
	Spare Welder Tip 0.9mm (for .030” wire)
Accessories	Welding Face Shield
	Wire Brush / Hammer combination
	Save This Manual

You will need the manual for the safety warnings and precautions, assembly instructions, operating and maintenance procedures, parts list and diagram. Keep your invoice with this manual. Write the invoice number on the inside of the front cover. Keep the manual and invoice in a safe and dry place for future reference.

General Safety Rules

WARNING!

READ AND UNDERSTAND ALL INSTRUCTIONS.Failure to follow all instructions listed below may result in electric shock, fire, and/or serious injury.

SAVE THESE INSTRUCTIONS

Work Area

1.Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents.

2.Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes.

3.Keep bystanders, children, and visitors away while operating a power tool.

SKU 55167	For technical questions, please call 1-800-444-3353;	Page
	Troubleshooting section at end of manual.