Specialized 23A manual Timer Stopwatch With Lap-timer

The following 17 functions are available on your Turbo® Pro:

•SPEED – Current Speed

•AVSPD – Average speed

•MXSPD – Maximum Speed

•TRIP – Trip Distance

•ODO – Odometer

(total distance)

•ATM – Automatic

•Start/Timer

•TIMER – Stopwatch With Lap-timer

•CAD – Cadence

•AVCAD – Average Cadence

•MXCAD – Maximum Cadence

•INT – Interval Timer

•DISTÚ– Distance Countdown

•ALTI – Current Altitude

•ALTIÒ – Altitude Climbed

•%GRD – Inclinometer

•TEMP – Temperature in ˚C or ˚F

•CLOCK – Digital 12/24 Hour Clock

This computer also features: Wireless speed sensing Wired cadence sensing

2

Two function LCD Display Second Wheel Option Easy Calibration Mode Water resistant housing 2 Year Warranty Backlit LCD display

The following items are included in your Turbo® Pro package: Turbo® Computer CR-2032 Lithium Battery

(1)

Battery Door (1)

26.0mm mounting bracket

(1)

31.8mm mounting bracket

(1)

Cadence sensor (1) Magnet with screw (1) Adhesive backed magnet

(1)

Cadence magnet (1) Cable tie wraps (10) Mounting bracket sizing straps (3)

11.Speed Transmitter and mount (1)

BATTERY INSTALLATION AND REPLACEMENT Before using your Turbo® Pro Computer you will need to install the battery.

FIGURE 2

Turn the computer over so the display is facing downward. Use a coin to unthread the battery cap from the computer. Install the battery (model CR2032, Specialized P/N 481-3004) with the positive pole (+) facing upward. Carefully thread the battery cap back onto the case with a coin. (See Figure 3) If, after battery replacement, the LCD dis- play is blank or shows incomplete digits, turn the computer over and press the “AC” button on the bottom of the case with the tip of a pen or a

paper clip. This will clear all the data and re-start the computer. If you need to replace the battery, make a note of your odometer reading and wheel circumference set- tings before removing it. You can then re-enter the data when you restart the computer.

Replacing the Transmitter Battery

The Wireless Transmitter comes with the battery installed at the factory. If you need to replace this battery, use a coin to unthread the battery cap

3