Speco Technologies M19LCBVH3, M17LCBVH3 user manual AV Input Mode, Saturation, Sharpness

	H-POSITION:Moves the image on screen
	either left (－) or right (＋).
	V-POSITION:Moves the image on screen
	either up (＋) or down (－).
GEOETRY	CLOCK: If the clock is not fine-tuned, you
	may observe periodic vertical bars of
	video noise on your image. These bars of
	noise are usually adjusted out when an
	Auto Configuration is performed. If the
	bars of noise are still present, this setting
	can be adjusted manually.
	PHASE: Adjusts the signal phase to
	improve sharpness when the image is
	fuzzy.
	AUTO ADJUST: Performs automatic
	configuration of the Phase, Clock, vertical,
	and horizontal position settings.
	BASS: Adjustment range:0-100
	TREBLE: Adjustment range:0-100
	BALANCE: Adjusts how much audio is
	sent to the left and right (-50 to +50).
AUDIO	The intermediate value is 0. When
	indication value of balance increases
	toward +50, the volume of the right and
	left speaker increase and decrease. When
	the indication value of balance decreases
	toward -50 the volume of the right and left
	speaker increase and decrease.
	SOUND MODE: Provides special
	processing through your speakers
	(depending on the setting you chose as
	your Sound Type). The available audio
	modes are: Standard, User, Movie, Music)
	AVC: (Automatic Volume Control)
	ON & OFF

12

2. AV Input Mode

	CONTRAST: Adjusts the difference
	between the light and dark areas of the
	picture.
PICTURE	BRIGHTNESS: Adjusts the brightness of
	the picture.
	HUE: -50 to +50 (only available on AV
	PAL)
	SATURATION: 0-100
	SHARPNESS: 0-100
	COLOR TEMP: Press the “+” button to
	change the color intensity of the
	temperature selected (Normal, Warm,
	Cool, S-RGB, User)
	SCALE: Full, Normal, or Center
	PICTURE MODE: User, Standard, Soft, or
	Vivid
	LANGUAGE: Lets you select your
	preferred language for the menus:
	(English, Chinese, German, French,
	Spanish, Italian, Portuguese, or Russian)
OSD	OSD H-POSITION:Adjust the OSD image
	horizontally by pressing the + or – buttons.
	OSD V-POSITION:Adjust the OSD image
	vertically by pressing the + or – buttons.
	DURATION: 5-60
	HALFTONE: 0-100
	BACKLIGHT: HIGH MID LOW
	MEM-RECALL:Pressing the + key will be
	reset all settings to the factory default
	settings.

13