Spectra QM55 Specifications, General Care, Safety And Storage, Transport, Trouble Shooting

FUNCTIONS - Area, Volume, Indirect Measure (Pythagorean Theorem)

1)Press the FUNC button and cycle through the symbols until you arrive at the desired function as shown in this figure.

Area Volume Indirect Double Indirect

2)Press the ON button to activate the laser and take first measure

3)Press the ON button to activate the laser and take second measure

4)Press the ON button to activate the laser and take third measure (if required)

The display will indicate which measure is being taken as per the following chart.

FUNCTIONS - Area, Volume, Indirect Measure

Measurement Function	Icons	Measurement Sequence
Single Measurement
Area Measurement
Volume Measurement
Height
(Pythagorean Theorem)
Measurement 1
Height
(Pythagorean Theorem)
Measurement 2

The result will be displayed along with the individual measures.

NOTE: The indirect and indirect double measurements are based upon the Pythagorean principle which requires a right angle (90⁰) for accuracy. The indirect measure estimate is less accurate if the measurements do not form a right angle.

Addition and Subtraction

+ The next measure is added to the previous one

-The next measure is subtracted from the previous one See figure

Storage and Recall of Measurements

The QM55 will automatically store the previous 50 measurements results.

1)To retrieve these measures: press the clear button (C/OFF)until there are no measures shown on the screen

2)Press the + button. The Display will appear like the figure.

3)The higher number (up to 50) indicates the most recent measurement taken.

4)Use the + or – buttons to scroll through the measurements.

Specifications

Measuring Range	0.5 m to 50 m (1.6 to 165 ft)
Accuracy	± 1.5 mm typical (± 1/16 in)
Functions	Measure, Continuous measure, Area, Volume,
	Pythagorean, Add/Subtract, Stake out, memory
	50 measures
Measure reference	Front, Center, Rear, Rear with Extension
Automatic shut off	Laser - 0.5 minutes
	Product - 3 minutes
Battery life (alkaline)	5000+ measures
Operating temperature	-10⁰C to +50⁰C	(14⁰F to 122⁰F)
Storage temperature	-20⁰C to +65⁰C	(-4⁰F to 149⁰F)
Power supply	2 x AAA x 1.5V
Power indication	LCD 3 segments - 100%, 50%, 0%
Laser Safety	Class II as per EN 60825-1:2007;
	IEC 60825-1:2007 CFR 21 § 1040 (FDA)
Laser Type / Power	635 nm visible red / 0.95 mW max
Dimensions	52 x 28 x 125 mm (2.0 x 1.1 x 4.9 in)
Weight	180 g (6.35 oz) without batteries
Dust & Water resistance	IP54
Drop Performance	1.5 m (5 ft)

– 13 –

General Care, Safety And Storage

General safety rules

a)Check the condition of the tool before use.

b)The user must check the accuracy of the tool after it has been dropped or subjected to other mechanical stresses.

c)Although the tool is designed for the tough conditions of jobsite use, as with other measuring instruments it should be treated with care.

Do not use prisms or mirrored surfaces

Distances can be measured from all stationary targets without a highly reflective surface, i.e. concrete, stone, wood, plastic, paper, etc. The use of prisms or other highly reflective targets is not permissible and, if attempted, may falsify the results.

Calibration Check

It is recommended to occasionally check the calibration of the tool.

1)Select a known measure distance about 1 to 5 meters (3 to 15 ft) that does not change over time.

2.) Measure the distance 10 times. Calculate the mean deviation from the actual distance. The measured mean deviation should be less than the typical accuracy tolerance of ± 1.5 mm (± 1/16 in)

– 14 –

Cleaning and drying

1.Blow dust off the lens.

2.Do not touch the lens with the fingers.

3.Use only a clean, soft cloth for cleaning. If necessary, moisten the cloth slightly with pure alcohol or a little water.

NOTE Do not use any other liquids as these may damage the plastic components.

Storage

The temperature limits for storage of your equipment must be observed, especially in winter / summer.

Remove the tool from its pouch if it has become wet. The tool, its carrying case and accessories should be cleaned and dried (at maximum 40°C). Repack the equipment only once it is completely dry. Check the accuracy of the equipment before it is used after a long period of storage or transportation.

Transport

Use the original packaging or packaging of equivalent quality for transporting or shipping your equipment.

CAUTION

Always remove the batteries before shipping the tool.

	– 15 –	– 16 –
Trouble Shooting
Message Code	Possible cause	Remedy
101	Battery too low	Change batteries
104	Calculation error	Repeat procedure
152	Temperature too high	Allow the unit to cool down
153	Temperature too low	Allow the unit to warm up
154	Out of range	Measure target within distance of 0.5 and 50 m (1 to 165 ft)
155	Received signal too weak	Use light color target;
		Hold Quick Measure more steady
156	Received signal too strong	Use dark colored target
157	Background brightness too high	Use dark-colored target
	Weak signal	Adjust measurement conditions until signal strength is stronger
	Hardware error	Switch unit on/off several time. If this symbol remains, contact your dealer

– 17 –

Laser Safety

Use of this product by people other than those trained on this product may result in exposure to hazardous laser light.

•Do not remove warning labels from the unit.

•The QM55 is a Class 2M (635 nm) laser product .

•Never look into the laser beam or direct it to the eyes of other people.

•Always operate the unit in a way that prevents the beam from getting into people‘s eyes.

– 18 –

Warranty

Trimble warrants the Quick Measure QM55 to be free of defects in material and workmanship for a period of 3 years. For the first 2 years, Trimble or its authorized Dealer or Service Center will repair or replace, at its option, any defective part, or the entire product, for which notice has been given during the warranty period. For the 3rd year, an exchange fee may apply. This warranty period is in effect from the date the system is delivered by Trimble or its authorized Dealer to the purchaser, or is put into service by a Dealer as a demonstrator or rental component.

Any evidence of negligent or abnormal use, or any attempt to repair equipment by other than factory-authorized personnel or Trimble certified or recommended parts, automatically voids the warranty.

The foregoing states the entire liability of Trimble regarding the purchase and use of its equipment. Trimble will not be held responsible for any consequential loss or damage of any kind.

This warranty is in lieu of all other warranties, except as set forth above, including an implied warranty. Merchantability of fitness for a particular purpose is hereby disclaimed.

Customers should send products to the nearest authorized Factory, Dealer or Service Center for warranty repairs, freight prepaid. In countries with Trimble Service Subsidiary Centers, the repaired products will be returned to the customer, freight prepaid.

– 19 –

Service Request

To locate your local dealer or authorized Trimble Service Center outside the U.S.A. for service, accessories, or spare parts, contact one of our offices listed below.

North-Latin America	Asia-Pacific
Trimble / Spectra Precision Division	Trimble Navigation Singapore PTE Ltd.
8261 State Route 235	80 Marine Parade Road, #22-06
Dayton, Ohio 45424-6383	Parkway Parade
U.S.A.	Singapore, 449269
(888) 527-3771	+65 6348 2212 Phone
(Toll Free in U.S.A.)	+65 6348 2232 Fax
+1-937-203-4419 Phone	China
+1-937-482-0030 Fax	Trimble Beijing
www.trimble.com/spectra
	Room 2805-07, Tengda Plaza,
Europe	No. 168 Xiwai Street
Trimble Kaiserslautern GmbH	Haidian District
Am Sportplatz 5	Beijing, China 100044
67661 Kaiserslautern	+86 10 8857 7575 Phone
GERMANY	+86 10 8857 7161 Fax
Tel +49-(0)6301-71 14 14	www.trimble.com.cn
Fax +49-06301-32213
Africa & Middle East
Trimble Export Middle-East
P.O. Box 17760
JAFZ View, Dubai
UAE
+971-4-881-3005 Phone
+971-4-881-3007 Fax

– 20 –

Declarations

We declare, on our sole responsibility, that this product complies with the following directives and standards:

EN 50081-1, EN 61000-6-2, 2004/108/EC.

Designation: Laser range meter

Type: QM55

Notice to Our European Union Customers

For product recycling instructions and more information, please go to: www.trimble.com/environment/summary.html

Recycling in Europe

To recycle Trimble WEEE, call: +31 497 53 2430, and ask for the “WEEE associate,” or

mail a request for recycling instructions to: Trimble Europe BV

c/o Menlo Worldwide Logistics Meerheide 45

5521 DZ Eersel, NL

N324

© 2012, Trimble Navigation Limited. All rights reserved. Reorder PN 1213-1320 Rev A (08/12)

– 21 – – 22 – – 23 –