Accessing the Function Menu
Press FCN followed by a digit
When you are on a call, your Wireless Telephone display will show a solid number indicating which line you are currently using. If a second call comes in on another line, a flashing second number will appear to indicate which line is ringing. If a second call comes in on the same line, the line number will begin flashing. You can answer the call by
If two or three line appearances have been assigned to your feature template, you can access them by pressing LINE followed by either 1, 2 or 3 on the Wireless Telephone.
The Wireless Telephone has two volume levels, low and high. You can set your low volume level by pressing FCN while your Wireless Telephone is
Press FCN followed by a digit
| Function Key | Fill In Your |
Strokes | Feature Settings |
|
|
FCN + 1 |
|
|
|
FCN + 2 |
|
|
|
FCN + 3 |
|
|
|
FCN + 4 |
|
|
|
FCN + 5 |
|
|
|
FCN + 6 |
|
|
|
FCN + 7 |
|
|
|
FCN + 8 |
|
|
|
FCN + 9 |
|
|
|
FCN + * |
|
|
|
FCN + 0 |
|
|
|
FCN + # |
|
|
|
For information on Battery Pack charging and setting user preferences, see the Wireless Telephone User Guide.
Wireless Telephone Quick Reference Guide
Cisco Systems: CallManager
NetLink e340 Wireless Telephone
On/Off Press and hold PWR. Two chirps on, one chirp off
Make a call Press START to get dial tone.
Hang up Press END. Be sure to do this at the end of each call.
Answer call Press START. Line indicator comes on steady when the call is answered.
Answer Press HOLD to put your current call second call on hold, or END to hang up. Press
LINE + the digit that is flashing.
Hold Press HOLD
Take off Hold Press LINE followed by the digit for the line on hold, which will be flashing.
Function Pressing FCN while off hook allows you to scroll through menu screens.
User Options Press FCN while on hook to change handset settings.
Adjust Volume Press VOL while in a call to toggle between base and louder level
Status/Tone Indicators
NO SVC An alarm sounds when the Wireless Alarm / Restore Telephone cannot receive or place
calls. You may be outside of the coverage area. Walk back into the covered area. A restore tone indicates service is
BATT Your Battery Pack charge is low. Beep Your Battery Pack needs to be recharged or replaced.
MSG You have a voice mail message.
AutAns Displays when the Wireless FwdAll Telephone is powered on but not in
use to indicate that the feature is enabled.
