Manuals
/
Brands
/
Cell Phone
/
Cell Phone
/
SpectraLink
/
Cell Phone
/
Cell Phone
SpectraLink
I640, h340, E340 manual
1
1
60
60
Download
60 pages, 2.26 Mb
NetLink e340/h340/i640 Wireless Telephone
Mitel Networks 3300 and SX-200 ICP
Configuration and Administration
Part Number: 72-1084-02
Issue E
Contents
Main
Notice
Trademark Information
Table of Contents
1. About This Document 4
2. NetLink e340/h340/i640 Wireless Telephone Overview 5
3. The NetLink Wireless Telephone 10
4. NetLink Wireless Telephone Configuration 16
Note these instructions carefully.
2. NetLink e340/h340/i640 Wireless Telephone Overview
The latest software versions are required to support the features described
2.1 QoS and Security
2.2 Quick Start Guide
IP multicast addresses are used by the NetLink i640 Wireless Telephone.
2.3 System Diagram
2.4 System Components
Page
3. The NetLink Wireless Telephone
NetLink e340/h3401 Wireless Telephone NetLink i640 Wireless Telephone
3.1 Specifications
3.2 The Display
Page
3.3 Startup Sequence
3.4 Handset Modes
3.5 NetLink Wireless Telephone Displays
4. NetLink Wireless Telephone Configuration
If an Admin password has been set, the display will require its entry before
4.1 The Admin Menu
Page
Admin menu
Page
If you Save with no entry, the password is erased and the display will not
Note that the handsets cannot roam across subnets, since they cannot
For WEP, WPA-PSK and WPA2 PSK set each of the following options to
Encryption codes display as they are entered. For security reasons codes
Consult the Configuration Note for the access points (APs) installed in your
As of this writing, Spain and France are adopting the general European
Page
4.2 User-defined Preferences
Standby menu
buttons. Select an option by pressing the Select side button.
what languages are available. Select the language from the list.
Page
Page
Page
If PTT is allowed in the Admin menu and enabled by the user, Battery
5. License Management
For the SBC HIPCS solution, software is pre-loaded onto an SBC TFTP
5.1 Requirements
5.2 Configuration Process
For future software upgrades, simply update the files that are stored on the
6. Mitel Networks VoIP Integration Factors
Page
7. Feature Programming
7.1 Feature Assignment
If an Open Application Interface (OAI) is operational, a function key
7.2 Feature Access
The handset emulates the operation of the 5220 IP Phone including:
Page
Page
8. Testing a Handset
9. Diagnostic Tools
9.1 Run Site Survey
Page
9.2 Diagnostics Mode
Page
Page
9.3 Syslog Mode
If the syslog server address is blank (000.000.000.000 or 255.255.255.255)
Messages are formatted like the following example:
10. Certifying the NetLink Wireless Telephones
10.1 Conducting a Site Survey
11. Software Maintenance
11.1 Upgrading NetLink Wireless Telephones
Page
12. Troubleshooting NetLink Wireless Telephone Problems
12.1 Access Point Problems
12.2 Configuration Problems
12.3 NetLink Wireless Telephone Status Messages
Page
Page
Page
Configuration Note
Page
Page
Page
Index