SpectraLink E340, I640, h340 manual Feature Assignment, key Feature, Fcn +

SpectraLink Corporation	Configuration and Administration—NetLink e340/i640 Wireless Telephone
	Mitel Networks 3300 and SX-200 ICP and 5220 IP Phone emulation

7.1Feature Assignment

The table below shows how the keys of the 5220 IP Phone are mapped to key sequences on the handset.

5220 key	Feature	handset
		Shortcut & Key Sequence
Trans/Conf	Transfer or conference	FCN +	1
Cancel	Cancel	FCN +	2
Message	Voicemail	FCN +	3
Redial	Redial	FCN +	4
	Mute/Unmute	FCN +	5
Programmable Feature Key 2-14	If a feature, the feature name	FCN +	7
Programmable to either line	appears on the Feature menu with		8
appearances or features.	a shortcut key2 in the order of		9
	assignment to a feature key.		*
			0
			#
Feature Key #1	Line appearance	Line +	1
	If a line, the line extension	Line +	2
	appears on the Line Appearance		3
	list, with a line number that		4
	corresponds to the order of		5
	assignment to a feature key.		6
			7
			8
			9
Softkey1	Phonebook (Phbk)	Softkey	A
Softkey2	Programmable	Softkey	B
Softkey3	Programmable	Softkey	C
Superkey	Superkey	FCN +	6
		(Superkey)
Hold (in call)	Hold	Softkey	D
		(toggles between
		Superkey and Hold)

If an Open Application Interface (OAI) is operational, a function key sequence will be assigned in the OAI configuration and will override any function sequence established in the PBX.

2Note: There may be more features programmed than there are available shortcut keys. In this situation, the feature may be activated by using the Up, Down, Select buttons on the side of the Wireless Telephone.

PN: 72-1084-02-E.doc Page 36