XT175 / XT275
10
Getting familiar with the control panel
XT175 Console
GETTING STARTED:
Power the treadmill on by plugging it into an appropriate wall outlet, then turn on the power switch
located at the front of the treadmill below the motor hood. Ensure that the safety key is installed,
as the treadmill will not operate without it.
When the power is initially turned on, the display will light up and show ODO in the center of the
display and a number in the Distance window. This is an odometer reading that shows how many
virtual miles the treadmill gone. Then HRS is displayed and a number in the Time window shows
how many hours the treadmill has been used. Then VER is displayed and a number in the Speed
window shows the current software version of the console. The console will now be in idle mode,
which is the starting point for operation.
QUICK START:
After the treadmill is powered on and the safety key is in place simply press the START key. The
treadmill will start at the minimum speed of 0.5 mph, the time will count up from zero and all data
will begin accrual. You can adjust the speed and elevation manually by pressing the desired
speed and elevation buttons or the quick keys. Press stop to end workout.