Removing the Battery Insulator TAB | Sportline 310 manual

REMOVING THE BATTERY INSULATOR TAB

NOTE: In order to activate your pedometer after purchase, you must remove the battery insulator tab inside the battery compartment.

1. Unscrew the battery compartment door with a small Phillips screwdriver.

2. Remove the tab (be sure that the battery is in the correct polarity position – positive (+) side of the battery is visible).

3.Replace the battery compartment door and tighten the fastening screw with a Phillips screwdriver.

4. Remove the label that appears on the pedometer display.

Qlip 3

Image 5

Sportline 310 manual Removing the Battery Insulator TAB

Contents

Pedometer Table of Contents Introduction HOW to USE this Manual Removing the Battery Insulator TAB Page Pedometer Other Time TimerPedometer Functions For Most Accurate Pedometer Readings HOW to Wear Your Pedometer Reset KEY Mode KEYAdjust KEY Keys and Their Functions Main Operating Modes Pressing the Adjust key Setting Time Setting the Pedometer Functions Setting User Data Viewing Pedometer Data Operating the Pedometer Resetting Pedometer Data HOW this Pedometer Helps YOU Achieve Your Goal Replacing the battery Replacing the Battery Customer Support Care & Maintenance Time Ranges & SpecificationsPedometer Warrant Y Guarantee Certificate for Purchases Made in the U.S WV4405IS01SPT