INTRODUCTION
Congratulations on your purchase of a Sportline TraQ Pedometer. The TraQ Pedometer features the Infinity Motion Sensor, a highly advanced pedometer technology that accurately measures your body movements from multiple locations on the body and in multiple orientations.
Please keep in mind your pedometer is a sensitive technical instrument. With proper care and maintenance, it will last for many years. However, improper care and handling can cause the various sensors to be damaged and to stop functioning.
HOW TO USE THIS MANUAL
Sportline TraQ Pedometers have many unique features and functions. Please read all sections of this manual carefully and become familiar with the operation of the pedometer before using it in the field.
Proper setup and operation will greatly enhance the pedometer’s usefulness and your enjoyment of the product.
The manual is divided into sections outlining each of the major functions of the pedometer. A drawing of the screen that represents a starting point or other important point for each operational process is shown adjacent to the instructions; important keys are shown indicating PRESS & HOLD and PRESS.
The steps for the programming or operation are adjacent to the screen illustration. Key points and important information are shown in highlighted blocks.
1
REMOVING THE BATTERY INSULATOR TAB
NOTE: In order to activate your pedometer after purchase, you must remove the battery insulator tab inside the battery compartment.
1. Unscrew the battery compartment door with a small Phillips screwdriver.
2. Remove the tab (be sure that the battery is in |
|
the correct polarity position – positive (+) side | battery tab prior to use |
| Please remove |
of the battery is visible). |
|
3.Replace the battery compartment door and
tighten the fastening screw with a Phillips screwdriver.
4.Remove the label that appears on the
pedometer display.
Please remove
battery tab prior to use
TraQ 2
