Sprint Nextel manual Powering Sprint Phone Connect 2 On and Off, Understanding the Indicators

Note: The telephone and telephone cord are not included. You must provide your own telephone and telephone cord.

Note: The device and telephone cord are for indoor use only.

Note: Only telephones connected directly to the Sprint Phone Connect 2 will receive service. If the Sprint Phone Connect 2 is connected to a cordless phone base station, any extension phones compatible with that base station will also receive service.

Powering Sprint Phone Connect 2 On and Off

Use the power button to turn the Sprint Phone Connect 2 on and off.

►To power the device on, press and hold the button until power indicator turns on.

►To power the device off, press and hold the button until all indicators turn off.

Note: For the first time you use the Sprint Phone Connect 2, wait 3-5 minutes for activation to finish or while LEDs are blinking green from right to left. Do not touch your Sprint Phone Connect 2 during this time. If after 5 minutes the LED lights are still blinking, power cycle your device using the power button.

Understanding the Indicators

The four LED lights on the front of your device let you know your device’s status at any given time.

Light	Indicator	Meaning
Power	White	The device is on
	Solid Green	Full Charge
Battery	Blinking Green	Partial Charge
	Blinking Red	Low Charge
	Solid Red	No Battery Charge
Signal	Green	With signal
	Off	Without signal
Signal Strength	Green	Good or Ok
	Red	Poor or None
Voicemail	Blinking Green	New Message
ALL LEDs	Blinking Green from Left to Right	The software is being updated

Installation and Operation 7