Sprint Nextel LG G2 manual Pairing Bluetooth Devices, Pair Your Phone, Disconnect a Paired Phone

4.Tap Search for devices at the bottom of the screen to search for in-range Bluetooth- compatible devices. Make sure the target device is set to be discoverable.

Pairing Bluetooth Devices

The Bluetooth pairing process allows you to establish trusted connections between your phone and another Bluetooth device. When you pair devices, they share a passkey, allowing for fast, secure connections while bypassing the discovery and authentication process.

Pair Your Phone

1.Verify your Bluetooth is active.

2.From the Bluetooth settings page, tap G2 to make your phone visible. Your phone must be visible to successfully pair with an external device.

3.Tap Search for devices. (Your phone will display a list of discovered in-range Bluetooth devices.)

4.Tap a device from the list to initiate pairing.

5.Depending on the device, you might have to tap Pair to accept the passkey (if they match), confirm matching passkeys, or enter the passkey or PIN Code.

6.Tap Done > OK if you entered a passkey or PIN code.

7.The external device will then have to accept the connection and enter your phone’s PIN code.

Note: Due to different specifications and features of other Bluetooth-compatible phones, display and operations may be different, and functions such as transfer or exchange may not be possible with all Bluetooth compatible phones.

Pairing between two Bluetooth phones is a one-time process. Once a pairing has been created, the phones will continue to recognize their partnership and exchange information without having to re- enter a passcode again.

Disconnect a Paired Phone

Disconnecting a paired device breaks the connection between the device and your phone, but retains the pairing. At a later point when you wish to reconnect the device, there is no need to setup the connection information again.

1.Verify your Bluetooth is active.

2.From the Bluetooth settings page, tap next to the previously paired device (under the PAIRED DEVICE section).

3.Tap Unpair.

Note: Disconnections are manually done but often occur automatically if the paired device goes out of range of your phone or if it is powered off.

Tools and Calendar 148