
Getting Started
Before you can use your Sprint Mobile Broadband Card, you must:
1.Install the Sprint PCS Connection Manager Software, located on the installation CD, onto your computer.
Note: Before installing your new software, delete or uninstall any previously existing modem or dialer software from your system.
Do not insert the card into the slot until you have installed the Sprint PCS Connection Manager Software onto your PC or until instructed to do so by the installation CD.
2.Insert the card into your computer’s PC slot (Sprint label facing up). Windows will detect the card and automatically install the necessary card drivers.
Note: A driver is software that forms the interface between a device
(such as the Sprint Mobile Broadband Card) and the operating system on your PC.
3.Launch the Sprint PCS Connection Manager Software application.
4.Activate your Sprint Mobile Broadband Card and Sprint PCS account, unless it was preactivated. If your card has not previously been activated, the Activation Wizard will automatically launch and guide you through the process.