Tools and Calendar 187
Send Information Using Bluetooth
Receive Information Using Bluetooth
Turn Bluetooth On or Off
The following procedures will guide you through turning on and turning off your Bluetooth
device.
1. Press > and tap Settings > Bluetooth.
2. Tap the ON/OFF slider to move it into the ON position to turn Bluetooth on.
Tip: You can also turn Bluetooth on and off through the Notifications panel. Drag the
Notifications panel down and tap Bluetooth to enable or disable Bluetooth.
Note: Turn off Bluetooth when not in use to conserve battery power, or in places where using a
wireless phone is prohibited, such as aboard an aircraft and in hospitals.
Change the Phone Name
The phone name identifies your phone to other phones.
1. Press > and tap Settings > Bluetooth.
2. If Bluetooth is not on, tap the on-off slider to turn it on.
3. Tap > Device name.
4. Enter the name for your phone in the dialog box, and then tap OK.
Connect a Bluetooth Headset or Car Kit
You can listen to music over a Bluetooth stereo headset, or have hands-free conversations
using a compatible Bluetooth headset or car kit. It’s the same procedure to set up stereo audio
and hands-free devices.
To listen to music with your headset or car kit, the headset or car kit must support the A2DP
Bluetooth profile.
1. Press > and tap Settings > Bluetooth.
2. If Bluetooth is not on, tap the on-off slider to turn it on.
3. Make sure that the headset is discoverable, so that your phone can find the headset.
Refer to the instructions that came with the headset to find out how to set it to
discoverable mode.
4. Tap Scan. Your phone will start to scan for Bluetooth devices within range.