/ Fill /
Class 600 splash fill bars are available in the following materials:
•PVC in “Omega”, “Mega” or “Alpha” configurations.
•
•Rough sawn,
“G” configurations.
Each cooling tower application is individually reviewed to assure selection of the proper fill type and fill spacing. Performance is computer optimized to assure maximum cooling from a given tower cell size for the design performance conditions.
Long functional life for cooling tower fill depends on the splash bar support. Wood lath and PVC splash bars are supported in FRP grids. Chemically, the resistance of FRP to acids, alkalis, salts, and oils is rated excellent through concentrations much higher than could ever occur in a cooling tower. Mechanically, the FRP support system takes advantage of tensile strength exceeding 30,000 psi. FRP exhibits very little creep under stress of live and dead loads throughout the extremes of moisture and temperature variations.
6
