SPX Cooling Technologies SPXM-08 manual Air2AirTM System, Warm moist air is cooled as it flows

Air2AirTM System

Water. We can’t live without it. And, in many parts of the world, we can barely get enough. The impact on industry is huge. Short water supplies can limit plant production, block industrial growth

and expansion, drive up treatment costs for the water that actually is available, and heavily burden existing infrastructures. Meanwhile, the more usable water an operation demands, the less energy-efficient it becomes. But now there is real help on the way.

Enter SPX Cooling Technologies. Our unique Air2Air water recovery system does what no other cooling technology can: reduce your cooling tower water consumption by up to 30% annually.*

That level of reduction can add up quickly, fueling your productivity and growth while increasing energy efficiency. And Air2Air systems can be used in either new or existing cooling towers.

*Dependent upon system operating conditions and local weather conditions.

Warm moist air is cooled as it flows

Cool ambient air supply to Air2Air condenser packs

Warm, moist air drawn off of heat-transfer media

Condensed water recovered or retained in the circulating system

Cooler, mixed air exits cooling tower

Hot water distribution over heat-transfer media

Cooling tower heat-transfer media (fill)

Cool ambient air enters at base of cooling tower

The Air2Air water recovery system allows cooler, ambient air to condense much of the moisture before it exits the tower. The system can be installed on a single cooling tower cell, or on an entire tower, depending on the required water return rate.

And what to do with the water you save? It can be cycled back into the cooling system. Or piped away as a pure water stream for boiler make-up or other plant uses. Or even returned to the local aquifer – it’s that pure.