|
|
|
|
| SSI | |
|
|
|
| EPS2U Power Supply Design Guide, V2.1 | ||
|
| Table 16: 600 W Load Ratings – Split Plane |
|
| ||
| Voltage |
| Minimum Continuous | Maximum Continuous | Peak | |
| +3.3 V |
| 0.8 A | 24 A |
|
|
|
|
|
|
|
|
|
| +5 V |
| 0.5 A | 20 A |
|
|
|
|
|
|
|
|
|
| +12V1 |
| 0 A | 12 A | 15 A | |
|
|
|
|
|
|
|
| +12V2 |
| 0 A | 12 A | 15 A | |
|
|
|
|
|
|
|
| +12V3 |
| 0.9 A | 14 A |
|
|
|
|
|
|
|
|
|
| +12V4 |
| 0.1 A | 8.0 A | 13 A | |
|
|
|
|
|
|
|
|
| 0 A | 0.5 A |
|
| |
|
|
|
|
|
|
|
| +5 VSB |
| 0.1 A | 2.0 A |
|
|
|
|
|
|
|
|
|
1.Maximum continuous total DC output power should not exceed 600 W.
2.Maximum continuous combined load on +3.3 VDC and +5 VDC outputs shall not exceed 140 W.
3.Maximum peak total DC output power should not exceed 710 W.
4.Peak power and current loading shall be supported for a minimum of 1 second.
5.Maximum combined current for the 12 V outputs shall be 42 A.
6.Peak current for the combined 12 V outputs shall be 51 A.
Table 17: 650 W Load Ratings – Split Plane
Voltage | Minimum Continuous | Maximum Continuous | Peak |
+3.3 V | 0.8 A | 24 A |
|
|
|
|
|
+5 V | 0.5 A | 24 A |
|
|
|
|
|
+12V1 | 0 A | 12.5 A | 15 A |
|
|
|
|
+12V2 | 0 A | 12.5 A | 15 A |
|
|
|
|
+12V3 | 0.9 A | 14 A |
|
|
|
|
|
+12V4 | 0.1 A | 8.0 A | 13 A |
|
|
|
|
0 A | 0.5 A |
| |
|
|
|
|
+5 VSB | 0.1 A | 2.0 A |
|
|
|
|
|
1.Maximum continuous total DC output power should not exceed 650 W.
2.Maximum continuous combined load on +3.3 VDC and +5 VDC outputs shall not exceed 140 W.
3.Maximum peak total DC output power should not exceed 770 W.
4.Peak power and current loading shall be supported for a minimum of 1 second.
5.Maximum combined current for the 12 V outputs shall be 45 A.
6.Peak current for the combined 12 V outputs shall be 54 A.
6.4.1Standby Outputs
STATUS
Required
The 5 VSB output shall be present when an AC input greater than the power supply turn on voltage is applied.
- 18 -
