ASSEMBLY INSTRUCTIONS
Place all parts from the box in a cleared area and position them on the floor in front of you. Remove all packing materials from your area and place them back into the box. Do not dispose of the packing materials until assembly is completed. Read each step carefully before beginning. If you are missing a part please call our
STEP 1
Attach the FRONT STABILIZER(2), the short one with the ENDCAPS(36), to the front of the FRONT FRAME(1) with CARRIAGE BOLTS(M8x1.25x65mm)(47), ARC WASHERS(M8)(65), LOCK WASHERS(M8)(67), and ACORN NUTS(M8x1.25)(61).
STEP 2
Unscrew to remove the ADJUSTMENT KNOB(37) from the FRONT FRAME(1). Slide the REAR FRAME(3) backward and secure with the ADJUSTMENT KNOB(37). Attach the REAR STABILIZER(4), the one with the LEVELING CAPS(40), to the REAR FRAME(3) with CARRIAGE BOLTS(M8x1.25x65mm)(47), ARC WASHERS(M8)(65), LOCK WASHERS(M8)(67), and ACORN NUTS(M8)(61).
NOTE: You can adjust the LEVELING CAPS(40) on the REAR STABILIZER(4) to keep the Recumbent Bike stable.
STEP 3
Attach the LEFT and RIGHT SEAT FRAMES(5, 6) to both sides of the REAR FRAME(3) with BUTTON HEAD BOLTS(M10x1.5x122mm)(49), WASHERS(M10)(69), and NYLOCK NUTS(M10x1.5)(59).
7
