SET UP INSTRUCTIONS

Place the Air Fusion 4525 Bike in the area where it will be used. It is recommended that the Air Fusion 4525 Bike be placed on an equipment mat. The Air Fusion 4525 Bike is approximately 51 3/4 inches long x 24 3/8 inches wide x 45 inches tall (max.). (These dimensions may vary up to one inch.) An area 4 feet wide x 6.5 feet long is required for safe operation of the Air Fusion 4525 Bike. Make sure that adequate space is available for access to and passage around the Air Fusion 4525 Bike.

LEVELING: Adjust the STAND(53) under the FRONT FRAME(1) and the LEVELING CAPS(52) on the REAR STABILIZER(4) so that the Bike sits on the floor without rocking. Remove and reposition the LEVELING CAPS(52) on the REAR STABILIZER(4) to level the Air Fusion 4525 Bike.

MOVING: The Air Fusion 4525 Bike has a pair of WHEELS(51) on the FRONT STABILIZER(2). Lift up from REAR STABILIZER(4) to move the Air Fusion 4525 Bike.

EQUIPMENT MAT (not included)

To level the Air Fusion 4525 Bike, first screw the STAND(53) located in the middle of the FRONT FRAME(1) all the way up into the FRONT FRAME(1) so that it is not touching the floor. Adjust the two LEVELING CAPS(52) on the REAR STABILIZER(4). When the LEVELING CAPS(52) are adjusted and the Air Fusion 4525 Bike is stable, rotate the STAND(53) to make it contact with the floor.

While you are adjusting the LEVELING CAPS(52) the STAND(53) must not be in contact with the floor. Only after the Air Fusion 4525 Bike has been stabilized with the LEVELING CAPS(52) will you position the STAND(53) so it is in contact with the floor to provide extra stability for the frame.

FUNCTION INSPECTION:

Visually inspect the Air Fusion 4525 Bike to verify that assembly is as shown in the above illustration. Check the function of the Air Fusion 4525 Bike by turning the crank slowly through one complete revolution to verify that the drive train functions properly. Adjust the TENSION KNOB(29) to verify that the adjustable tension is working properly.

CAUTION: Locate and read the WARNING LABEL(78) on the Air Fusion 4525 Bike. Make sure that all users read the WARNING LABEL(78).

11

Page 11
Image 11
Stamina Products 15-4525 owner manual SET UP Instructions, Function Inspection