ASSEMBLY INSTRUCTIONS
B. | A. |
(Assembled |
|
at the factory) |
|
NOTE: Be careful not to damage the WIRES(38, 39, and 40) when attaching the HANDRAIL(6) and the
SEAT FRAME(5).
STEP 4
Refer to illustration A. Attach the HANDRAIL(6) to the SEAT FRAME(5) with CARRIAGE BOLTS (M8x1.25x45mm)(56), ARC WASHERS(M8)(77), LOCK WASHERS(M8)(80), and ACORN NUTS(M8x1.25) (75).
STEP 5
Refer to illustration B. Slide the SEAT FRAME(5) onto the REAR FRAME(3) and lock in position with the ADJUSTMENT KNOB(50). Attach the STOPPERS(51) to the top end of the REAR FRAME(3) with HEX BOLT(M8x1.25x80mm)(60) and NUT(M8x1.25)(72). Also, please verify that the other STOPPERS(51) are assembled at the factory.
8
