ASSEMBLY INSTRUCTIONS
Place all parts from the box in a cleared area and position them on the floor in front of you. Remove all packing materials from your area and place them back into the box. Do not dispose of the packing materials until assembly is completed. Read each step carefully before beginning. If you are missing a part please call our
STEP 1
Attach the FRONT STABILIZER(2), the short one with the WHEELS(52), to the front of the FRONT FRAME(1) with CARRIAGE BOLTS(M8x1.25x75mm)(57), ARC WASHERS(M8)(77), LOCK WASHERS(M8)(80), and
ACORN NUTS(M8x1.25)(75).
STEP 2
Attach the REAR STABILIZER(4), the one with the LEVELING CAPS(53), to the REAR FRAME(3) with CARRIAGE BOLTS(M8x1.25x75mm)(57), ARC WASHERS(M8)(77), LOCK WASHERS(M8)(80), and
ACORN NUTS(M8x1.25)(75).
STEP 3
Screw the STAND(54) all the way up into the bottom of the FRONT FRAME(1). Connect the REAR EXTENSION WIRE(38) to the FRONT EXTENSION WIRE(37). Insert the REAR FRAME(3) into the FRONT FRAME(1) and secure with BUTTON HEAD BOLTS(M10x1.5x15mm)(59), ARC WASHERS(M10)(78), WASHERS(M10)(83), and LOCK WASHERS(M10)(81).
NOTE: See page 11 for detailed leveling instructions to prevent rocking.
7
