Lanier 5618 Copy Paper, Copy Quantity, Copy Size Keys, Darker Copies, Developer Material, Tray

Copy Paper	See: paper
Copy Quantity	This display or part of a Touch Screen shows the requested number of
	copies.
Copy Size Keys	Keys used to input the desired size of the copy.
Darker Copies	This term refers to the amount of toner placed on the copy through the
	imaging process. The amount of toner is controlled by the “darkness” of
	the original and the amount of light used during the exposure process;
	more light means less toner or image density.
Developer Material	This is a supply used in the copier. It usually consists of two parts; a
	carrier material and the toner. The developer material is only used by a
	technician when installing a new unit or when cleaning a Developer Unit.
Developer Unit	An assembly located near the drum inside the copier that delivers the
	toner to the drum. It allow the correct amount of toner to be placed on the
	drum for each image.
Document Feed Tray	The Tray where an original document is placed to feed into an ADF for
	automatic feeding and copying.
Document Guide	These Guides are located in the Document Feed Tray. When correctly
	positioned against the sides of an original document, they help to position
	the pages of the document.
Document Receiving	A Tray used to accumulate the pages of an original document that have
Tray	completed the copying process.
Document Scale	Two scales located to the front and left of the Exposure Glass intended to
	help locate original documents placed on the Glass for manual copying
	and to identify a part of an original during the Editing process.
Documents	The set of pages either placed on the Exposure Glass or in the ADF to be
	copied.
Drum Assembly	The unit located inside the copier that receives the image during the
	exposure and imaging process and transfers this image to the copy paper.
	It is light sensitive and should be protected from bright lights.
Energy Saver Key	A Key used to place the copier into, or bring it out of an Energy Saver
	Mode. In the Energy Saver Mode, the amount of energy consumed by the
	copier is reduced.

G-2