Document Feeder
Document Feeder
The Reversing Automatic Document Feeder (RADF), feeds originals to the Exposure Glass for copying and it turns the original over for copying the other side of the original. Then, it exits the original onto the Document Tray.
•
•
You can place up to 50 originals in the Document Feeder for automatic feeding of originals to the Exposure Glass for copying.
You may also select a feature which allows you to feed one original at a time into the Document Feeder without having to press the Start key each time.
Precautions when using Document Feeders
1.Avoid using:
•Badly wrinkled or folded originals
•Clipped or stapled originals
•Carbon paper
•Torn originals
•Taped originals
•Damp originals
1.Folded or curled originals should be smoothed out before inserting into the Document Feeder.
2.Feeding a stack of different width originals through the Document Feeder is not recommended. Feed them through one at a time. You can, however, feed a stack of different length originals through the Document Feeder.
3.If the surface of any two originals are so rough that they cannot be moved when pinched between two fingertips, the friction between the originals may obstruct paper separation even when the paper weight is within specifications.
2.Avoid covering the two sensors on the doc- ument feeder tray. These sensors detect the original size and could cause the original size to not be properly detected.
3 - 2 | Copier Functions |
