Lanier 5618 manual An error message is displayed

System Settings

Menu	Description
6. Auto Off Timer	The machine turns itself off automatically to conserve
	energy after your job is finished, after the selected
	time.This function is called “Auto Off”.The time can be set
	from 1 to 240 minutes.
	Auto Off might not be effective when the machine is in the
	following conditions:
	• An error message is displayed.
	• The remaining memory space for fax mode is less than
	100%.
	• When originals set in the document feeder.
	To return to the ready condition from Auto Off, the
	machine requires the same warm-up time as the time for
	becoming ready after power is turned on.
	When the machine receives a fax or printer data in Auto
	Off mode, it automatically prints the fax or the printer data.
	Default: 30 minutes
7. AOF (Keep It On.)	For details of this function, contact your service
	representative.
8. Special Paper Size	Select the size of the copy paper set in the paper tray.
	If the specified paper size differs from the size of paper
	actually set in the paper tray, a paper misfeed might occur
	because the paper size is not detected correctly.
	The size of paper you can load in the LCT (Large Capacity
	Tray) is fixed depending on your locale. However, if you
	wish to switch from A4 to 8 1 /2”× 11"or vice-versa,
	please contact your service representative.
9. Paper Tray Priority (for	You can select the paper tray which will be selected as a
Copy mode only)	default in the following conditions:
	• When the operation switch is turned on.
	• When the Clear Modes key is pressed.
	• When Auto Paper Select mode is not selected.
	1: Tray 1
	2: Tray 2
	3: Tray 3 (Paper Bank)
	4: Tray 4 (Paper Bank)
	Tray 3 and Tray 4 are options.
	Default: Tray 1

5 - 4 User Tools Settings