Lanier 5618 manual Component Locations Front, Platen Cover or Document Feeder optional

Component Locations - Front

1Platen Cover or Document Feeder (optional)

Lower the platen cover over originals placed on the exposure glass for copying. If you have the document feeder, insert a stack of originals here. They will be fed automatically. When the document feeder (RADF) is installed, you can copying two-sided originals. (The illustration shows the document feeder.)

2Exposure Glass

Position originals here face down for copying.

3Internal Tray

Copied paper is delivered here face down.

4Ventilation Hole

Prevents overheating. Do not obstruct the ventilation hole by placing or leaning an object near it. If the machine over-heats, a fault might occur.

5Main Power Switch

If the machine does not operate after turning on the operation switch, check if the main power switch is turned on. If it is off, turn it on.

6Behind Cover

Flip up when you use the keys underneath.

7Main Power Indicator

This indicator lights up when the main power switch is turned on, and goes off when the switch is turned off.

8On Indicator

This indicator lights up when the operation switch is turned on, and goes off when the switch is turned off.

2 - 4 Component Identification