Lanier 5618 manual Initial Settings, Interrupt Key, Key Operator, Lighter Copies, Message Display

Initial Settings	Those settings displayed by a copier when it comes to the READY
	condition. These settings may be either the Factory Default settings, or
	Factory Default settings that have been modified permanently by either
	you or your Service Technician to better fit your application.
Interrupt Key	The Key used to interrupt a long copy job in process in order to run a
	single copy. Interrupt copies are limited to one, and the interrupt original
	must be copied from the Exposure Glass.
Key Operator	The main operator responsible for the copier. This individual performs all
	operator prescribed maintenance and is the main contact in the event of a
	service call.
Lighter Copies	This term refers to the amount of toner placed on the copy through the
	imaging process. The amount of toner is controlled by the “darkness” of
	the original and the amount of light used during the exposure process;
	more light means less toner or image.
Message Display	This display or part of a Touch Screen shows messages related to the
	status of the copier, Help messages and program information.
On/Stand by Switch	A switch located on the exterior of the copier used to control the power to
	the copier.
Original Cover	On copiers not equipped with a Document Feeder, a Cover protects the
	Exposure Glass and prevents stray light from entering the copier during
	the copy process. Unless copying a 3-dimensional object, the cover
	should be down.
Original Direction	This icon instructs the operator which direction to place the document in
Indicator	the Document Feeder or on the Exposure Glass. This is particularly
	helpful when different paper sizes are available and when certain features
	are used such as; when reducing a legal sheet to letter-size paper, the icon
	would instruct you to feed the original lengthwise.
Paper Tray	A paper carrier designed as part of the base of the copier. It is used to
	store and feed a stack of paper of one size. Some are designed to be
	adjusted but can only accommodate one size at a time.
Paper Weight	Throughout the Operator Guide there are references to 20 lb. or 24 lb.
	paper. This refers to a standard measuring technique. A certain number of
	sheets cut to a particular size weighs 20 or 24 pounds. The weight
	specification usually correlates with the thickness of the paper. It also
	generally implies stiffness with the lighter papers being more limber and
	the heavier papers being stiffer. Copiers are designed to feed certain
	weight papers through the Drawers or Cassettes. Heavier stock, such as
	cover stock, can be fed through the Bypass Feed Tray.

G-4