ASSEMBLY INSTRUCTIONS

Place all parts from the box in a cleared area and position them on the floor in front of you. Remove all packing materials from your area and place them back into the box. Do not dispose of the packing materials until assembly is completed. Read each step carefully before beginning. If you are missing a part, please go to staminaproducts.com under the Service section and order the part needed, e-mail us at customerservice@staminaproducts.com, or call us toll free at 1-800-375-7520 (in the U.S.). Our Customer Service Staff is available to assist you from 7:30 A.M. to 5:00 P.M. (Central Time) Monday through Thursday and 8:00 A.M. to 3:00 P.M. (Central Time) on Friday.

STEP 1

Insert the REAR STABILIZER(1) into the MAIN SUPPORT(3) and secure with HEX BOLTS(M10x1.5x20mm) (20), and WASHERS(M10)(23). Press a NUT CAP(M10)(26) onto each bolt head of HEX BOLTS (M10x1.5x20mm)(20).

STEP 2

Insert the FRONTSTABILIZER(2) into the FRONTSUPPORT(4) and secure with HEXBOLTS(M10x1.5x20mm) (20), and WASHERS(M10)(23). Press a NUT CAP(M10)(26) onto each bolt head of HEX BOLTS (M10x1.5x20mm)(20).

STEP 3

Attach the FRONT SUPPORT(4) to the MAIN SUPPORT(3) with HEX BOLT(M10x1.5x70mm)(18), WASHERS(M10)(23), and NYLOCK NUT(M10x1.5)(25). Press the NUT CAPS(M10)(26) onto the bolt head of HEX BOLT(M10x1.5x70mm)(18) and NYLOCK NUT(M10x1.5)(25). Lock the FRONT SUPPORT(4) in position by inserting the LOCKING PIN(15) through the bracket on the MAIN SUPPORT(3) and the FRONT

SUPPORT(4).

FRONT

REAR

7

Page 7
Image 7
Stamina Products 20-2015 owner manual Assembly Instructions, Step