STORAGE

1.To store the Ab/Hyper Pro, simply keep it in a clean dry place.

2.The Ab/Hyper Pro must be lifted for movement. Two people may be required.

3.Follow the following process to fold the Ab/Hyper Pro as illustrated for easy storage.

a. Remove the LOCKING PIN(14) to adjust the KNEE CUSHIONS(3) to lowest position. Then lock in position with the pin.

b. Remove the LOCKING PIN(14) from the SEAT ADJUSTMENT(9) to fold down the SEAT CUSHION(1). Store the pin in the hole on the CUSHION SUPPORT

FRAME(4).

c. Remove the LOCKING PIN(14) from the SUPPORT POST(5) to fold the CUSHION SUPPORT FRAME(4). Store the pin in the same hole in the SUPPORT

POST(5).

MAINTENANCE

The safety and integrity designed into the Ab/Hyper Pro can only be maintained when the Ab/Hyper Pro is regularly examined for damage and wear. Special attention should be given to the following:

1.Verify that all nuts and bolts are present and properly tightened. Replace missing nuts and bolts. Tighten loose nuts and bolts.

2.Verify that the CAUTION LABEL(28) is in place and easy to read. Call Stamina Products immediately at 1-800-375-7520for a replacement CAUTION LABEL(28) if it is missing or damaged.

3.It is the sole responsibility of the user/owner to ensure that regular maintenance is performed.

4.Worn or damaged components shall be replaced immediately or the Ab/Hyper Pro removed from service until repair is made.

5.Only Stamina Products supplied components shall be used to maintain/repair the Ab/Hyper Pro.

6.Keep your Ab/Hyper Pro clean by wiping it off with an absorbent cloth after use.

11

Page 11
Image 11
Stamina Products 20-2021 owner manual Storage, Maintenance