SET UP INSTRUCTIONS
Place the INSTRIDE ELLIPTICAL in the area where it will be used. It is recommended that the INSTRIDE ELLIPTICAL be placed on an equipment mat. The INSTRIDE ELLIPTICAL is approximately 33 1/2" long x 17 3/4" wide x 46 3/4" tall. (These dimensions may vary up to one inch.) An area 4 feet wide x 5.5 feet long is required for safe operation of the INSTRIDE ELLIPTICAL. Make sure that adequate space is available for access to and passage around the INSTRIDE ELLIPTICAL.
LEVELING: Adjust the LEVELING CAPS(44) on the REAR STABILIZER(3) so that the INSTRIDE ELLIPTICAL sets on the floor without rocking.
MOVING: Grasp the HANDRAIL(7) and REAR STABILIZER(3) to move the INSTRIDE ELLIPTICAL, two people are required for moving. Do not use the Pedal Arms to move the INSTRIDE ELLIPTICAL. The Pedal Arms will move and may pinch your hand or fingers.
Equipment Mat
FUNCTION INSPECTION:
Visually inspect the INSTRIDE ELLIPTICAL to verify that assembly is as shown in the above illustration. Check the function of the INSTRIDE ELLIPTICAL. Stand on the foot pedals and place your hands at a comfortable position on the handrail. Slowly move your highest foot forward and follow the natural path of the machine. Turn the crank slowly through one complete revolution to verify that the drive train functions properly. Adjust the TENSION KNOB(22) and verify that it functions properly.
CAUTION: Locate and read the WARNING LABEL(69) on the INSTRIDE ELLIPTICAL. Make sure that all users read the WARNING LABEL(69).
10
