ASSEMBLY INSTRUCTIONS
L |
L |
R |
R |
STEP 5
NOTE: 1. There is an "L" decal on the LEFT PEDALARM(4), and an "R" decal on the RIGHT PEDALARM(5).
2.The RIGHT PEDAL SHAFT(46) has right hand threads and is tightened by turning clockwise. The LEFT PEDAL SHAFT(45) has left hand threads and is tightened by turning counterclockwise.
Place the front end of the RIGHT PEDAL ARM(5) on the ROLLER(60) of the FRONT STABILIZER(2). Connect the back end of the RIGHT PEDAL ARM(5) to the RIGHT CRANK(42). Thread the RIGHT PEDAL SHAFT(46) into the RIGHT CRANK(42) by hand. SECURELY TIGHTEN using a 15mm
Check the tightness of the PEDAL SHAFT(45, 46) and CRANK(41, 42) regularly. Retighten as necessary.
WARNING!
The PEDAL SHAFT(45, 46) must be securely tightened to the CRANK(41, 42). Failure to securely tighten may cause the PEDAL SHAFT(45, 46) to become loose from the CRANK(41, 42) and may result in serious injury to user and damage to product. The shoulder of the PEDAL SHAFT(45, 46) should be in contact with the CRANK(41, 42) when securely tightened.
STEP 6: There is an "L" decal on the LEFT PEDAL CAP(50), and an "R" decal on the RIGHT PEDAL CAP (51). Attach the RIGHT PEDAL CAP(51) to the RIGHT PEDAL ARM(5) with ROUND HEAD SCREWS (M5x15mm)(76). Repeat on the left side.
NOTE: The LEFT and RIGHT PEDAL CAPS(50, 51) have a raised lip on two sides. Attach the LEFT and RIGHT PEDAL CAPS(50, 51) to the LEFT and RIGHT PEDAL ARMS(4, 5) so the raised lip is on the front and the inner sides.
9
