SET UP INSTRUCTIONS
Place the Magnetic 1772 Elliptical in the area where it will be used. It is recommended that the Magnetic 1772 Elliptical be placed on an equipment mat. The maximum operation dimensions of the Magnetic 1772 Elliptical are approximately 54 inches long x 59 1/2 inches tall x 24 3/8 inches wide. (These dimensions may vary up to one inch.) An area 4 feet wide x 7 feet long is required for safe operation of the Magnetic 1772 Elliptical. Make sure that adequate space is available for access to and passage around the Magnetic 1772 Elliptical.
LEVELING: Adjust the LEVELING CAPS(61) on the REAR STABILIZER(3) so that the Magnetic 1772 Elliptical sits on the floor without rocking.
MOVING: The Magnetic 1772 Elliptical has a pair of WHEELS(60) on the FRONT STABILIZER(2). Grasp the STATIONARY HANDLEBAR(7) and tip the Magnetic 1772 Elliptical forward to move.
Stationary Handlebar(7) 
Equipment Mat
FUNCTION INSPECTION:
Visually inspect the Magnetic 1772 Elliptical to verify that assembly is as shown in the above illustration. Check the function of the Magnetic 1772 Elliptical, stand on the foot pedals and place your hands at a comfortable position on the handlebars. Slowly move your highest foot forward and follow the natural path of the machine. Turn the crank slowly through one complete revolution to verify that the drive train functions properly. Adjust the TENSION KNOB(25) and verify that it functions properly.
CAUTION: Locate and read the WARNING LABEL(91) on the Magnetic 1772 Elliptical. Make sure that all users read the WARNING LABEL(91).
12
