ASSEMBLY INSTRUCTIONS
Place all parts from the box in a cleared area and position them on the floor in front of you. Remove all packing materials from your area and place them back into the box. Do not dispose of the packing materials until assembly is completed. Read each step carefully before beginning. If you are missing a part, please go to staminaproducts.com under the Service section and order the part needed,
STEP 1
Refer to the illustration below. Place the MAIN FRAME ASSEMBLY(1)
STEP 2
Attach the EXTENSION FRAME(4) to the MAIN FRAME(1) with BUTTON HEAD BOLTS (M10x1.5x25mm)(7) and WASHERS(M10)(8). Place the MAIN FRAME ASSEMBLY(1) to its upright
position.
FRONT
7 | 8 | 7 |
|
|
| ||
|
|
| |
|
| 8 | 3 |
|
|
| |
|
| 7 |
|
| 4 | 8 |
|
|
|
| |
|
|
| Flange Plates |
|
| 7 | face out. |
|
|
| 8 |
|
|
| 8 |
|
|
| 7 |
1
REAR
7