OPERATIONAL INSTRUCTION
LOAD ADJUSTMENT
The resistance of the CARRIAGE(25) can be adjusted by securing the TENSION CORDS(29) in the slots on the CORD HOLDER(21). You can achieve various levels of resistance by securing different numbers of the TENSION CORDS(29) in the slots.
NOTE: Over time your TENSION CORDS(29) will relax. To increase resistance in the TENSION CORDS(29), stretch and
ROPE LENGTH ADJUSTMENT
The ROPES(41) feed through the PULLEY SETS(38) then thread through the loops on the underside of both outer edges of the CARRIAGE(25). PLASTIC SNAP HOOKS(42) on the end of each rope are used to adjust the ROPE(41) length. If more length is needed, attach the PLASTIC SNAP HOOKS(42) to loop D. To shorten, bring the ROPES(41) around the last loop D and secure to loops A, B, or C with the PLASTIC SNAP HOOKS(42). Wrap ROPES(41) through the loops and attach where needed to shorten ROPES(41) even more.
A
B 
C
D
10
