GX1256SPage 30
7.2 DSC SCAN
When the radio is shipped from the factory it is programmed so CH70 (the
DSC channel) is scanned at all times. There is a selection in the SETUP
MENU to disable the DSC SCAN. However, turning off DSC SCAN will dis-
able the radio from receiving DSC calls i.e.: Individual Call, All Ships Call,
Distress Call and Position Requests. If you want to use any of the functions
the selection must be left ON.
To Change DSC SCAN Method:
1. Press and hold down the [CALL/SET(MENU)] key until
“RADIO SETUP” appears.
2. Press the [DOWN] key to select “DSC SETUP.”
3. Press the [CALL/SET(MENU)] key, then press the [UP]
or [DOWN] key to select “DSC SCAN.”
4. Press the [CALL/SET(MENU)] key to enable setting this
item (The number in the display will flash).
5. Press the [UP] or [DOWN] key to select “on” or “oF (off).”
6. Press the [CALL/SET(MENU)] key to store the selected
setting.
7. Press the [UP] or [DOWN] key to select “EXIT,” then
press the [CALL/SET(MENU)] key.
8. Press the [UP] or [DOWN] key to select “EXIT,” then
press the [CALL/SET(MENU)] key to return to the nor-
mal operation.