ANTENNA CONNECTOR
The supplied CAT460 flexible antenna is attached here.
PUSH-TO-TALK (PTT) SWITCH
When pushed activates the transmitter.
SQUELCH (SQL) SWITCH
Sets the point at which random noise on the channel will not activate the audio circuits but a received signal does. This point is called the Squelch threshold. Further adjustment of the squelch control will degrade the reception of wanted transmissions. To quickly open the squelch and monitor a channel before transmitting, press and hold this key for 3 seconds.
POWER SWITCH
Press and hold in this switch for 2 seconds to toggle the transceiver’s power “on” and “off.”
[S(UP)] KEY
Press to select a desired channel. Each press increases the channel number. When held down, the channels increase continuously.
[T(DOWN)] KEY
Press to select a desired channel. Each press decreases the channel number. When held down, the channels decrease continuously.
MICROPHONE
The internal microphone is located here.
[16/9] KEY
Immediately recalls channel 16 from any marine channel or band loca- tion. Holding down this key recalls channel 9.
[WX] KEY
Immediately recalls the
Secondary use:
When the [16/9] key is held and the [WX] key is pressed, the radio will change the marine channel between the USA, International, and Cana- dian channels.
HX500S |
| Page 13 |
|