
to 12 characters).
9.After completing your adjustment, press the SQL switch to save the new setting.
10.Press the PTT key to exit to normal operation.
dUL (DW DISPLAY)
Function: Selects the Dual Watch scanning display mode.
Available Values: Normal / Special
Default: Special
When “Special” is selected the channel shown on the display is the last channel the HX500S received a call on. This is a handy feature if you cannot look at the radio the moment a transmission was received.
LP (LAMP MODE)
Function: Selects the Lamp illumination method for the LCD and Keypad.
Available Values: Key / oFF / Cnt
Default: Key
Key: Illuminates the LCD/Keypad for 5 seconds when any key is pressed.
oFF: Disables the LCD/Keypad illumination.
Cnt: Illuminates the LCD/Keypad continuously.
SnL (SCAN LAMP)
Function: Enable/Disable the automatic illumination of the lamp when a signal is received on a channel during Scanning.
Available Values: ON / OFF
Default: OFF
SCn (SCAN DISPLAY)
Function: Selects the display mode while scanning.
Available Values: Normal / Special
Default: Normal
When this menu is set to “Normal,” the channel numbers during scan will be shown scrolling on the display. When Special is selected the channel numbers on the display do not change unless a call was received. The channel shown is the last channel that was received.
dt (DUAL WATCH MODE)
Function: Selects dual or
Available Values: d- (Dual Watch) / t- (Tri Watch)
Default: d-
HX500S |
| Page 27 |
|