SAFETY PRECAUTIONS

Tool operators and maintenance personnel must always comply with the safety precautions given in this manual and on the stickers and tags attached to the tool and hose.

•Do not operate a damaged, improperly adjusted, or incompletely assembled chain saw. Be sure that the chain stops moving when the control trigger is re- leased.

These safety precautions are given for your safety. Re-

• Never wear loose clothing that can get entangled in

view them carefully before operating the tool and before

the working parts of the tool.

performing general maintenance or repairs.

• Keep all parts of your body away from the chain saw

 

Supervising personnel should develop additional pre-

and maintain proper footing and balance at all times.

cautions relating to the specific work area and local

• Warning: Use of this tool on certain materials during

safety regulations. If so, place the added precautions in

demolition could generate dust potentially contain-

the space provided in this manual.

ing a variety of hazardous substances such as as-

 

The model CS05/CS06 Hydraulic Chain Saw will provide

bestos, silica or lead. Inhalation of dust containing

safe and dependable service if operated in accordance

these or other hazardous substances could result

with the instructions given in this manual. Read and un-

in serious injury, cancer or death. Protect yourself

derstand this manual and any stickers and tags attached

and those around you. Research and understand

to the tool and hose before operation. Failure to do so

the materials you are cutting. Follow correct safety

could result in personal injury or equipment damage.

procedures and comply with all applicable national,

 

state or provisional health and safety regulations

 

relating to them, including, if appropriate arranging

 

for the safe disposal of the materials by a qualified

 

person.

 

• Do not rely exclusively upon the safety devices built

• The operator must start in a work area without by-

into the saw. As a chain saw user, several steps

must be taken to keep your cutting jobs free from

standers. Flying debris can cause serious injury.

accidents or injury.

• Do not operate the tool unless thoroughly trained

–– With basic understanding of kickback, you can

or under the supervision of an instructor. Establish

reduce or eliminate the element of surprise.

a training program for all operators to ensure safe

Sudden surprise contributes to accidents.

operation.

–– To avoid personal injury or equipment damage,

• Always wear safety equipment such as goggles, ear

all tool repair, maintenance and service must

and head protection, and safety shoes at all times

only be performed by authorized and properly

when operating the tool. Use gloves and aprons

trained personnel.

when necessary.

–– Keep a good firm grip on the saw with both

• The operator must be familiar with all prohibited

hands, the right hand on the rear handle and

work areas such as excessive slopes and danger-

the left hand on the front handle when operating

ous terrain conditions.

the saw. Use a firm grip with thumbs and fingers

• Do not inspect, clean or replace any part(s) if the

encircling the chain saw handles. A firm grip will

hydraulic power source is connected. Do not inspect

help reduce kickback and maintain control of

or clean the tool while the hydraulic power source is

the saw. Do not let go.

connected. Accidental engagement of the tool can

–– Make sure the area in which you are cutting is

cause serious injury.

free of obstructions. Never allow the nose of the

• Always connect hoses to the tool hose couplers be-

guide bar to contact the log, branch or any ob-

fore energizing the hydraulic power source. Be sure

struction that can be accidently hit while operat-

all hose connections are tight and are in good condi-

ing the saw.

tion.

–– Never start the tool while it is lying on the ground.

• Do not operate the tool at oil temperatures above

–– Cut at rated operating speeds (gpm).

140 °F/60 °C. Operation at higher temperatures can

–– Do not overreach or cut above shoulder height.

cause higher than normal temperatures at the tool

which can result in operator discomfort.

–– Follow the manufacturer’s sharpening and

 

CS05/CS06 User Manual ◄ 5

Page 4 Page 6
Page 5
Image 5
Stanley Black & Decker CS05/CS06 user manual Safety Precautions
Page 4 Page 6

CS05/CS06 specifications

Stanley Black & Decker has long been synonymous with quality and innovation in the industrial tools sector, and their CS05 and CS06 models exemplify this commitment. These two models represent some of the latest advancements in battery-powered electric tools designed for both professionals and DIY enthusiasts.

The Stanley Black & Decker CS05/CS06 models are engineered with a powerful motor that delivers impressive torque and speed, allowing users to tackle a variety of tasks with ease. The CS05 model typically features a 20V Max lithium battery system that provides longer run time and improved battery life, ensuring that users can complete their projects without interruption. This battery technology is particularly advantageous for high-demand applications, making it ideal for construction, woodworking, and metalworking.

One of the standout features of the CS05/CS06 is their ergonomic design. Both models boast a lightweight structure and well-balanced form, allowing for extended use without causing fatigue. The soft-grip handle enhances user comfort and control, making precision tasks much simpler. Additionally, the compact design of the tools aids in maneuverability in tight spaces, making them perfect for both professional and home environments.

In terms of technology, the CS05/CS06 incorporates advanced electronic controls that offer variable speed settings. This allows users to adjust the speed according to the specific requirements of the job, providing versatility that is essential for tackling various materials and applications. The built-in LED work light is another handy feature, illuminating dark areas or work surfaces to improve visibility and accuracy during use.

Durability is a prominent characteristic of the Stanley Black & Decker CS05 and CS06 models. Constructed with high-quality materials, both tools are designed to withstand the rigors of demanding job sites. The protective housing and robust components ensure longevity and reliable performance, even under extreme conditions.

Lastly, both models come equipped with features that enhance safety, including safety switches and guards that prevent accidental starts. The overall combination of strength, versatility, comfort, and safety makes the Stanley Black & Decker CS05/CS06 a top choice for anyone looking to invest in a reliable, high-performance electric tool. In today's ever-evolving market, these models stand out as examples of where quality meets innovation.
Top Page Image Contents