OPERATION

MOUNTING TO THE CARRIER

1.With the drop hammer laying on a flat level surface bolt the mounting plate to the mounting bracket. Ensure these bolts are torqued to the recommended value.

2.Bring the carrier up to the drop hammer from the bottom or impact end. If you have a quick attachment systems maneuver the mount plate on the carrier until it engages with the adaption plate. Then actuate the slides or levers to lock the plates together. With a pin mount system; maneuver the carrier until the pinholes are aligned and slide in the connection pins.

Ensure the pins are bolted in place. Grease these pivots as per the carrier manufactures recommendations. Never operate the drop hammer with a loose or ill-fitting attachment.

Connect the hoses to supply oil to the port marked "PRESS" on the valve block.

3.Carefully raise the drop hammer to the vertical position keeping the base of the machine close to the ground throughout the lifting movement. Slowly move the Cyclone through the full extent of rotation and lift to ensure no part of the machine or any hydraulic hosing foul the carrier arms or cylinders. Ensure hoses are long enough so they do not pull tight in any part of the rotation and short enough to stay clear of the ground or operating area.

4.Once the drop hammer is securely mounted to the carrier the Traveling Lock may be removed. Be sure to store this plate safely for future use.

During use, the traveling lock may be bolted outside the housing using the same hole as shown in Figure 2 below.

OPERATION

NOTICE

Failure to remove the travel lock may result in damage to the equipment during operation.

Exposure to silica dust during construction activities can cause serious or fatal respiratory disease. Use adequate respiratory protection.

OPERATION

Ensure that the drop hammer is operated at a safe distance from other personnel and equipment. Be sure all guards are in place.

Traveling Lock

Figure 2. Traveling Lock

The drop hammer's weight is normally rested on the skids during use. However when moving about the drop hammer may represent a heavy load for the carrier. Therefore care must be taken when moving about a job-site or when loading or unloading from a transporter. The drop hammer should be carried as low as possible and special care taken when nego- tiating uneven surfaces. Know the limits of your carrier.

NOTICE

The drop hammer is intended for use only on level or near level surfaces. Do not operate the drop hammer on uneven or unlevel surfaces.

DH USER MANUAL 11

Page 10 Page 12
Page 11
Image 11
Stanley Black & Decker DH1500, DH9000, DH3500 user manual Mounting to the Carrier, Operation
Page 10 Page 12

DH3500, DH1500, DH9000 specifications

Stanley Black & Decker, a leading name in power tools and home improvement products, has introduced a series of high-performance air compressors that cater to various needs. Among these are the DH9000, DH1500, and DH3500 models, each packed with unique features and innovative technologies designed to enhance efficiency and ease of use.

The Stanley Black & Decker DH9000 is a robust air compressor characterized by its high output and versatility. With a maximum pressure of 200 PSI, this model generates ample air power for heavy-duty applications. It is ideal for both professional mechanics and DIY enthusiasts who require reliable performance for tasks like inflating tires, powering pneumatic tools, or painting. The DH9000 features a durable steel tank designed for longevity and stability. Additionally, its oil-free pump ensures maintenance-free operation and reduces the risk of contamination, making it a user-friendly option for a wide array of tasks.

On the other hand, the DH1500 is tailored for those who need a more portable solution without sacrificing performance. This model boasts a compact design, making it easy to transport around job sites or for home use. It provides a maximum pressure of 150 PSI and is perfect for light to medium tasks such as powering nailers or inflating sport equipment. The DH1500’s innovative low-noise operation is a significant advantage, enabling users to work in residential areas without generating excessive sound. Furthermore, its quick recovery time ensures efficient performance, allowing users to complete their projects promptly.

Lastly, the DH3500 strikes a balance between power and portability, making it suitable for a variety of applications. With a maximum pressure of 175 PSI, it provides an excellent air supply for tasks like brad nailing, stapling, or air brushing. The DH3500 is equipped with a durable, oil-free pump, ensuring a long service life and minimal maintenance. Its heavy-duty gauge and regulator allow precise adjustments of the air pressure, which is essential for achieving optimal performance in different tasks. The built-in handle and lightweight design make the DH3500 easy to transport, perfect for users on the go.

In summary, the Stanley Black & Decker DH9000, DH1500, and DH3500 models represent a blend of power, portability, and reliability suitable for various applications. Each compressor is designed with user-friendly features and advanced technologies that cater to the specific needs of both professional tradespeople and hobbyists alike. Whether you're tackling heavy-duty projects or light tasks, these air compressors stand out for their performance and innovation in an ever-evolving market.
Top Page Image Contents