OPERATION

Storage Recommendations

1.The best storage place is one that is cool and dry away from direct sunlight and excess heat or cold.

2.Long storage will not harm the battery pack or charger. Under proper conditions, they can be stored for 5 years or more.

SAVE THESE INSTRUCTIONS FOR FU- TURE USE OPERATION

WARNING: To reduce the risk of serious per- sonal injury, turn tool off and disconnect tool from power source before making any adjustments or removing/installing attachments or accessories.

Installing and Removing the Battery Pack

NOTE: Make sure your battery pack is fully charged.

 

 

 

 

 

 

 

 

A

Figure 1

 

 

 

 

 

 

 

 

 

C

Figure 2

B

 

 

 

 

 

 

SPINDLE

 

F

 

 

LOCK

 

 

D

 

E

COLLET

LOCK

Figure 3

WARNING: Make sure the switch is in the off position before removing or installing battery.

To install the battery pack into the tool handle,

align the base of the tool with the notch inside the tool’s handle (Fig. 1) and slide the battery pack firmly into the handle until you hear the lock snap into place (Fig. 1).

To remove the battery pack from the tool, press the release buttons (A) and firmly pull the battery pack out of the tool handle. Insert it into the charger as described in the charger manual.

To Maintain Safe Tool Control

•Never operate the tool with one hand. Grind with both hands.

•Disconnect battery from tool before making ad- justments, changing bits, or cleaning tool.

•Do not start the tool with bit engaged in the material. The bit may grab the material.

Switch (Fig. 2)

To start the motor, slide the switch (B) to “I” or “On” position.

To stop the motor, slide the switch to (C) “O” or “Off” position.

Installing and Removing the Bit

This tool has a tool-free bit change system. To change bits, FIRST turn off the tool and disconnect the battery from the tool.

1.To replace bit, depress both spindle lock (D) and collet lock (E) and turn collet grip counterclockwise.

2.Insert or remove bit.

WARNING: The bits are sharp and should be handled with great care.

CAUTION: When replacing bits, do not insert cutting flutes into the collet. This may result in broken bits.

3.While depressing both spindle and collet locks, turn the collet grip clockwise to firmly tighten the collet. For some heavy duty applications, it may be necessary to use a wrench to further tighten the nut

(F) while depressing the spindle lock (D).

CAUTION: Never tighten the collet without a bit installed. This tool comes with a 1/4” collet. To change collets, remove the collet nut and insert the desired collet.

HGE12 User Manual ◄ 11

Page 10 Page 12
Page 11
Image 11
Stanley Black & Decker HGE12 user manual Save These Instructions for FU- Ture USE Operation
Page 10 Page 12

HGE12 specifications

Stanley Black & Decker has always been at the forefront of innovative tools and equipment. Among its latest offerings is the HGE12, a handheld electric tool that embodies the company’s commitment to quality, durability, and user satisfaction. Designed with both professionals and DIY enthusiasts in mind, the HGE12 presents a range of features that set it apart from its competitors.

One of the main features of the HGE12 is its powerful motor. With impressive wattage, this tool delivers consistent performance, making it easy to tackle tough tasks with ease. The motor is engineered for high efficiency, ensuring that users can complete projects quickly without sacrificing quality or precision.

Another notable characteristic of the HGE12 is its ergonomic design. Stanley Black & Decker understands the importance of user comfort, especially during extended periods of use. Consequently, the HGE12 incorporates a comfortable grip that minimizes fatigue. The balanced weight distribution allows users to maneuver the tool effortlessly, whether they are drilling, cutting, or performing other functions.

The HGE12 also boasts advanced technology that enhances its overall functionality. One such technology is its variable speed control. This feature allows users to adjust the speed according to the material being worked on, providing flexibility for a range of applications. This adaptability makes the HGE12 an ideal choice for different projects, from woodworking to metalworking.

Safety is paramount in tool design, and the HGE12 incorporates various safety features to ensure user protection. The tool is equipped with a two-step activation switch that prevents accidental startup, minimizing the risk of injuries. Additionally, the design includes built-in ventilation to prevent overheating during prolonged use, enhancing both safety and durability.

In terms of maintenance, the HGE12 is designed for easy upkeep. The manufacturer provides clear instructions for regular maintenance, ensuring that the tool remains in optimal working condition for years to come. The use of high-quality materials in its construction also means that the tool is built to last, providing excellent value for investment.

In conclusion, the Stanley Black & Decker HGE12 is a versatile and powerful handheld tool that caters to a variety of needs. With its robust motor, ergonomic design, versatile speed control, and emphasis on safety, it serves as an essential addition to any toolkit. Whether you're a professional contractor or a dedicated DIYer, the HGE12 stands ready to assist with all your projects, making it a reliable and practical choice.
Top Page Image Contents