CHARGER SAFETY

•When operating a charger outdoors, use an extension cord suitable for outdoor use and only if necessary. Use of a cord suitable for outdoor use reduces the risk of electric shock. Do not expose the charger to the elements like rain or snow.

•An extension cord must have adequate wire size (AWG or American Wire Gauge) for safety.

The smaller the gauge number of the wire, the great- er the capacity of the cable, that is 16 gauge has more capacity than 18 gauge. An undersized cord will cause a drop in line voltage resulting in loss of power and overheating. When using more than one extension to make up the total length, be sure each individual extension contains at least the minimum wire size. The following table shows the correct size to use depending on cord length and nameplate am- pere rating. If in doubt, use the next heavier gauge. The smaller the gauge number, the heavier the cord.

Total Length of Cord

25 ft. 50 ft. 75 ft. 100 ft. 125 ft. 150 ft. 7.6 m 15.2 m 22.9 m 30.5 m 38.1 m 45.7 m

Wire Size AWG

18 18 16 16 14 14

•Do not place any object on top of charger or place the charger on a soft surface that might block the ventilation slots and result in exces- sive internal heat. Place the charger in a position away from any heat source. The charger is ventilated through slots in the top and the bottom of the hous- ing.

•Do not operate charger with damaged cord or plug.

•Do not operate charger if it has received a sharp blow, been dropped, or otherwise damaged in any way. Take it to an authorized service center.

•Do not disassemble charger; take it to an au- thorized service center when service or repair is required. Incorrect reassembly may result in a risk of electric shock, electrocution or fire.

•Disconnect the charger from the outlet before attempting any cleaning. This will reduce the risk of electric shock. Removing the battery pack will not reduce this risk.

•NEVER attempt to connect 2 chargers together.

•The charger is designed to operate on standard

120V household electrical power. Do not attempt to use it on any other voltage. This does not apply to the vehicular charger.

Using Automatic Tune-Up™ Mode

The automatic Tune-Up™ Mode equalizes or balanc- es the individual cells in the battery pack allowing it to function at peak capacity. Battery packs should be tuned up weekly or after 10 charge/discharge cycles or whenever the pack no longer delivers the same amount of work. To use the automatic Tune-Up™, place the battery pack in the charger and leave it for at least 8 hours. The charger will cycle through the following modes.

1.The red light will blink continuously indicating that the 1-hour charge cycle has started.

2.When the 1-hour charge cycle is complete, the light will stay on continuously and will no-longer blink. This indicates that the pack is fully charged and can be used at this time.

3.If the pack is left in the charger after the initial

1-hour charge, the charger will begin the Automatic Tune-Up™ mode. This mode continues up to 8 hours or until the individual cells in the battery pack are equalized. The battery pack is ready for use and can be removed at any time during the Automatic Tune- Up™ mode.

4.Once the Automatic Tune-Up™ mode is complete, the charger will begin a maintenance charge; the red indicator will remain lit.

Chargers

Your tool uses a DEWALT 18 volt charger. Be sure to read all safety instructions before using your charger.

Charging Procedure

DANGER: Electrocution hazard. 120 volts pres- ent at charging terminals. Do not probe with conduc- tive objects. Danger of electric shock or electrocu- tion.

1.Plug the charger into an appropriate outlet before inserting battery pack.

2.Insert the battery pack into the charger. The red (charging) light will blink continuously indicating that the charging process has started.

3.The completion of charge will be indicated by the red light remaining ON continuously. The pack is fully charged and may be used at this time or left in the charger.

HGE12 User Manual ◄ 9

Page 8 Page 10
Page 9
Image 9
Stanley Black & Decker HGE12 user manual Charger Safety, Using Automatic Tune-Up Mode, Chargers, Charging Procedure
Page 8 Page 10

HGE12 specifications

Stanley Black & Decker has always been at the forefront of innovative tools and equipment. Among its latest offerings is the HGE12, a handheld electric tool that embodies the company’s commitment to quality, durability, and user satisfaction. Designed with both professionals and DIY enthusiasts in mind, the HGE12 presents a range of features that set it apart from its competitors.

One of the main features of the HGE12 is its powerful motor. With impressive wattage, this tool delivers consistent performance, making it easy to tackle tough tasks with ease. The motor is engineered for high efficiency, ensuring that users can complete projects quickly without sacrificing quality or precision.

Another notable characteristic of the HGE12 is its ergonomic design. Stanley Black & Decker understands the importance of user comfort, especially during extended periods of use. Consequently, the HGE12 incorporates a comfortable grip that minimizes fatigue. The balanced weight distribution allows users to maneuver the tool effortlessly, whether they are drilling, cutting, or performing other functions.

The HGE12 also boasts advanced technology that enhances its overall functionality. One such technology is its variable speed control. This feature allows users to adjust the speed according to the material being worked on, providing flexibility for a range of applications. This adaptability makes the HGE12 an ideal choice for different projects, from woodworking to metalworking.

Safety is paramount in tool design, and the HGE12 incorporates various safety features to ensure user protection. The tool is equipped with a two-step activation switch that prevents accidental startup, minimizing the risk of injuries. Additionally, the design includes built-in ventilation to prevent overheating during prolonged use, enhancing both safety and durability.

In terms of maintenance, the HGE12 is designed for easy upkeep. The manufacturer provides clear instructions for regular maintenance, ensuring that the tool remains in optimal working condition for years to come. The use of high-quality materials in its construction also means that the tool is built to last, providing excellent value for investment.

In conclusion, the Stanley Black & Decker HGE12 is a versatile and powerful handheld tool that caters to a variety of needs. With its robust motor, ergonomic design, versatile speed control, and emphasis on safety, it serves as an essential addition to any toolkit. Whether you're a professional contractor or a dedicated DIYer, the HGE12 stands ready to assist with all your projects, making it a reliable and practical choice.
Top Page Image Contents