SAFETY INSTRUCTIONS

1.Read Instructions - All the safety and operating instructions should be read before this product is operated.

2.Retain Instructions - The safety and operating instructions should be retained for future reference.

3.Heed Warnings - All warnings on the appliance and in the operating instructions should be adhered to.

4.Follow Instructions - All operating and use instructions should be followed.

5.Water and Moisture -The appliance should not be used near water - for example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool, and the like.

6.Carts and Stands - The appliance should be used only with a cart or stand that is recommended by the manufacturer.

An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may

cause the appliance and cart combination to overturn.

7.Wall or Ceiling Mounting - The product should be mounted to a wall or ceiling only as recommended by the manufacturer.

8.Heat - The appliance should be situated away from heat sources such as radiators, heat registers, stoves, or other appliances (including amplifiers) that produce heat.

9.Power Sources - This product should be operated only from the type of power source indicated on the rating label. If you are not sure of the type of power supply to your home, consult your product dealer or local power company. For products intended to operate from battery power, or other sources, refer the operating instructions.

10.Grounding or Polarization - This product may be equipped with a polarized alternation-current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.

11.Power-Cord Protection - Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to the cord in correspondence of plugs, convenience receptacles, and the point where they exit from the appliance.

12.Cleaning - The appliance should be cleaned only as recommended by the manufacturer.

Clean by wiping with a cloth slightly damp with water. Avoid getting water inside the appliance.

13.For AC line powered units - Before returning repaired unit to user, use an ohm-meter to measure from both AC plug blades to all exposed metallic parts. The resistance should be more than 100,000 ohms.

14.Non-use Periods - The power cord of the appliance should be unplugged from the outlet when left unused for a long period of time.

15.Object and Liquid Entry - Care should be taken so that objects do not fall and liquids are not spilled into the enclosure through openings.

16.Damage Requiring Service - The appliance should be serviced by qualified service personnel when:

A.The power-supply cord or the plug has been damaged; or

B.Objects have fallen, or liquid has been spilled into the appliance; or

C.The appliance has been exposed to rain; or

D.The appliance does not appear to operate normally or exhibits a marked change in performance; or

E.The appliance has been dropped, or the enclosure damaged.

17.Servicing - The user should not attempt any service to the appliance beyond that described in the operating instructions. All other servicing should be referred to qualified service personnel.

18.Ventilation - Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from overheating, and these openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug, or other similar surface. This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is the manufacturer’s instructions have been adhered to.

19.Attachments - do not use attachments not recommended by the product manufacturer as they may cause hazards.

20.Accessories - Do not place this product on an unstable cart, stand, tripod, bracket, or table. The product may fall, causing serious injury to a child or adult, and serious damage to the product. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with the product. Any mounting of the product should follow the manufacturer’s

instructions, and should use a mounting accessory recommended by the manufacturer.

21. Lightning - For added protection for this product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the product due to lightning and power-line surges.

22.Replacement Parts - When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards.

23.Safety Check - Upon completion of any service or repairs to this product, ask the service technician to

perform safety checks to determine that the product is in

p r o p e r

o p e r a t i n g

c o n d i t i o n .

Page 3
Image 3
Stanton C-500 user manual Safety Instructions

C-500 specifications

The Stanton C-500 is a versatile and powerful DJ mixer designed to meet the demands of both professional and aspiring DJs. Renowned for its innovative features and robust build, the C-500 serves as an essential tool for live performances and studio sessions alike.

One of the hallmark features of the Stanton C-500 is its four-channel layout, allowing users to connect multiple devices simultaneously. This flexibility is ideal for DJs looking to mix various sources, such as turntables, CD players, or digital audio players. The mixer ensures that transitions between different audio sources are seamless, thanks to its high-quality rotary faders and crossfader.

Incorporating advanced EQ controls, the C-500 provides DJs with the ability to fine-tune their sound. Each channel is equipped with three-band EQ, enabling precise adjustments of bass, midrange, and treble frequencies. This feature is crucial for creating unique soundscapes and adapting to different environments, whether in a club, at a festival, or during an intimate gathering.

The C-500 also boasts high headroom, which minimizes distortion and allows for a cleaner signal, even at high volumes. This characteristic is particularly beneficial in live settings, where volume levels can fluctuate dramatically. Moreover, the mixer's solid construction ensures durability, making it a reliable choice for regular use.

In terms of connectivity, the Stanton C-500 includes a plethora of inputs and outputs. Users can connect microphones, instruments, and other external devices without hassle. The mixer also integrates a built-in USB interface, allowing DJs to easily connect to a computer for direct digital playback and recording capabilities.

An additional standout feature is the built-in effects system. The C-500 comes with various high-quality effects that can be applied to enhance the mixing experience. These effects can be manipulated in real-time, adding an extra layer of creativity to performances.

Overall, the Stanton C-500 is characterized by its user-friendly design, extensive connectivity options, and robust feature set. Whether you are a seasoned professional or an eager beginner, this mixer provides the tools needed to elevate live performances and produce captivating mixes.