Stanton C-500 user manual Pausing, Cueing, Operations

OPERATIONS

6.Pausing

˙Press the PLAY/PAUSE button to switch the play and pause.

˙The play indicator flashes when the pause mode is set.

˙Figure 6 show the relationship between the play and pause.

2 4 6

1

3

	7
5	Figure 6

The player has completed the cue or pause operation and is waiting for the play start command.

PLAY/PAUSE button is pressed and player enters play mode.

Playing.

The PLAY/PAUSE button is pressed and the unit enters

pause mode. Pausing.

Playback resumes when the PLAY/PAUSE button is pressed again.

Playing.

7.Cueing

˙"Cueing" is the action of preparing for playback.

˙Press the CUE button, the player will enter cue mode. The playback returns to the cue point and the player enters pause condition. The cue indicator lights up and play indicator flashes. When PLAY/PAUSE button is pressed, playback starts from the cue point.

˙When the track search operation is completed after pressing the SKIP buttons, the player automatically finds the position at which the sound starts and cues there(Auto Cue).

˙If the CUE button is pressed after the search operation or the scanning operation, the playback returns to cue point and enter pause condition.

˙Figure 7-1 shows the relationship between the play and back cue operations.

2 8

2 4

6 8

1

3

9

3

1

		7
5	9	Figure 7-1

The player has completed the cue or pause operation	pressed again.
and is waiting for the play start command.	Pausing.
When the PLAY/PAUSE button is pressed, playback	The PLAY/PAUSE button is pressed again;
starts and the cue point is stored in the memory.	Playing.
Playing.	Press the CUE button.
The pause mode is set when the PLAY/PAUSE button is	 The pickup returns to the cue point.(Back Cue)

Cue point setting:

When play starts from pause by pressing IN button or Scanning or Frame Search; also skip to a new track by using skip button, the begin play point will be set to the new cue point.

When a new cue point is set, the cue indicator lights by flashing for about 1 second.

NOTE: During cue mode, if the CUE button is pressed and held, playback will start from the cue point, when the button is released, the player will return to the cue mode automatically, this allows you to check the cue point.

8.JOG WHEEL - The jog wheel serves two functions depending on the current operating mode:

The jog wheel will act as a slow frame search control when the unit is in pause or cue mode allowing you to set a specific cue point or find a particular starting point.

The wheel also works as a momentary pitch bend during playback. Turning the wheel clockwise will increase the pitch percentage up to 4%,8%,16%, and turning the wheel in the counterclockwise direction will decrease the pitch percentage up to -16%. The pitch bend will be determined on how fast you turn the wheel.