Stanton CMP.800 user manual Search Buttons, SAMPLE Button

1)MODE 1 -­‐ It will show the playing point indicator around the ring. You can adjust the setting value range 1 of smallest indicator to 23 of full circle indicator.

2)MODE 2 -­‐ It will indicate the playing point opposite (onoff / offon) when the Jog Wheel is touched. You can adjust the setting value range 1 of smallest indicator off to 23 of full circle off.

3)MODE 3 -­‐ It will show the playing point indicator around the ring and flash to the playing level in both sides. You can adjust the setting value range 1 of smallest playing point indicator to 23 of full circle indicator.

4)MODE 4 -­‐ It will flash to the playing level around the ring.

5)MODE 5 -­‐ It will always on. You can adjust the setting brightness range 1 to 100.

6)MODE 6 -­‐ It will flash related to the setting speed. You can adjust the setting speed range 1 of fast flash to 100 of slow flash.

7)MODE 7 -­‐ It will show the playing point similar to trail effect.

8)MODE 8 -­‐ It will light when the Jog Wheel is touched.

9.TAP Button: This button is used for manual BPM. When in manual BPM mode, tap this button to the beat of the current track. Hold the TAP button for 1 sec. to activate Auto BPM.

10.Pitch Bend Buttons: The desired pitch of CD decreases or increases when this button is pressed and returns to the original pitch when the button is released.

11.SAMPLE Button:

a Press the SAMPLE button again to set the sample mode (LED is flash).

b Press this button, then press the desired BANK button to set the sample loop mode (LED is on). c Press the SAMPLE button again to cancel sample function.

d When sample mode is set, then sampler will mix the music together.

12.BANK Buttons 1~4: These buttons are used to store either four cue points or four samples. Each Bank Button can store either a sample or a cue point. To play your programmed samples, press the Sample button and then press the Bank Program button.

The stored Cue point will become sample when you change another CD or USB device to play.

13.SAVE Buttons: This button can be used in couple of ways:

a.Press this button to activate the memory mode, the save button LED will glow when active. After the memory mode is activated, press your desired bank button to store your CUE point or playing loop.

b.To store your loops and cue points that are saved in the BANKS to the system memory for next time, press the MEMORY button for 1 sec.

NOTE: RECALL MEMORY – The CMP.800 can store 2000 programmed cue points in 500 tracks for CD and 4 programmed cue points per track in the USB device. These setting may be recalledat any time, even when an audio source has been removed and loaded at a later time.

To recall the bank memory with CD/USB device: 1) Turn the TRACK knob to select the track which with the BANKS and “Load Cues?” will be shown on the VFD, press MIDI PLAYER A(Y) to load or press MIDI PLAYER B (N) not to load. Or 2) press the SAVE button, LED on, and turn the TRACK knob to select the TRACK with BANKS that you would like to recall.

14.CLEAR Button: Press CLEAR button, LED on, or hold the CLEAR button to select the BANK buttons you would like or clear.

15.Play/Pause Button: Each press of the button engages playback or pauses the track.

16.Cue Button: Pressing the Cue button during playback and returns the tracks to the last set cue point. When the song is paused, press the Cue button to set a new Cue point. Hold down the Cue button to engage Cue playback until released.

17.Cue Play Button: Press the button to return point and playing immediately.You can also tap the button to create a CUE RETURN effect.

18.Search Buttons:

This search button allows you to quickly scan backwards through a track.

This search button allows you to quickly scan forwards through a track.

19.Next Track Button: While either playing a track or in pause mode,press this button to search for the next track you want to play. NEXT TRACK indicators will flash. Now you can turn the FOLDER or TRACK knob to search for the next track. Press the MENU button you found your desired track.

20.TRACK Knob: This knob has three functions.

a.The knob is used to select a track. Turning track knob will forward/backward skip to next track.

b.Holding down and turning track knob will rapidly forward/backward skip through the tracks by 10 tracks per click.

c.Press track knob to switch file name/title (ID3)/artist (ID3)/Album (ID3)/Genre (ID3) on the VFD.

9