Stanton M.203 user manual Specifications, Power

Specifications

Specifications

1. POWER:	AC 100 – 240 V, 50/60 Hz, 16 W
2. DIMENSIONS (H x W x D)	108.2 mm x 250 mm x 352.6 mm
	10.82 cm x 25 cm x 35.26 cm
3. WEIgHT:	9.25 lbs / 4.2 kg
4. STANDARD TEST CONDITION:	Ambient Temperature: 22 +/- 2%
	Relative Humidity: 65 +/- 5%

5. INPUT/OUTPUT IMPEDANCE & SENSITIVITY:

(EQ FLAT, UNITY GAIN (ALL GAIN, LEVEL AT CENTER, FADER MAXIMUM), FX OFF, LOAD=100K ohm)

5-1. Input Impedance and Reference Level:

Line:	20K ohm /-10 dBV +/-0.1 dB (316 mV)
Phono:	47K ohm /-50 dBV +/-0.1 dB (3.16 mV)
Mic:	10K ohm /-50 dBV +/-0.1 dB (3.16 mV)
5-2. Output Impedance and Level:
Rec:	2.2K ohm /-10 dBV (316 mV) +/-2 dB
Master Unbal:	1K ohm /-10 dBV (316 mV) +/-2 dB
Phones (Load=32 ohm)	33 ohm /-10 dBV (316 mV) +/-2 dB
6. FREQUENCY RESPONSE: (EQ FLAT, UNITY GAIN, FX OFF, LOAD=100K ohm)
Line:	20 Hz – 20 kHz +/-2 dB
Phono:	20 Hz – 20 kHz +2/-3 dB (RIAA)
Mic:	20 Hz – 20 kHz +2/-3 dB
7. THD + N: (EQ FLAT, UNITY GAIN, FX OFF, W/20 kHz LPF, LOAD=100K ohm)
Line:	Less than 0.03% @1 kHz
Phono:	Less than 0.1% @ 1 kHz (A-WEIGHTED)
Mic:	Less than 0.1% @ 1 kHz (A-WEIGHTED)
8. MAXIMUM INPUT: (1 kHz, THD=1%, EQ FLAT, UNITY GAIN, FX OFF, LOAD=100K ohm)
Line:	More than +14 dBV
Phono:	More than -26 dBV
Mic:	More than -26 dBV
9. MAXIMUM OUTPUT: (1 kHz, THD=1%, EQ FLAT, MAXIMUM GAIN, FX OFF, LOAD=100K ohm)
Master:	More than +18 dBV (8.0 V)
Rec:	More than +13 dBV (4.5 V)
Phones	More than +4 dBV (1.58 V) LOAD=32 ohm
10. NOISE FLOOR: (EQ FLAT, UNITY GAIN, FX OFF, W/20 kHz LPF, A-WEIGHTED, LOAD=100K ohm)
Line, Aux:	Less than -86 dBV
Phono:	Less than -75 dBV
Mic:	Less than -76 dBV
11. CROSSTALK: (EQ FLAT, UNITY GAIN, FX OFF, W/20 kHz LPF, A-WEIGHTED, MASTER = +14 dBV OUTPUT)
L.R Separation:	More than 65 dB @ 1 kHz for LINE, and PHONO
Between Channels:	More than 70 dB @1 kHz for LINE to LINE,MIC
	More than 70 dB @ 1 kHz for LINE to PHONO
12. EQ: (UNITY GAIN, FX OFF, W/20 kHz LPF, LOAD=100K ohm)
Low	10 +/-2 dB, below -20 dB at 70 Hz
Mid	10 +/-2 dB, below -21 dB at 1 kHz
High	10 +/-2 dB, below -18 dB at 13 kHz
13. CHANNEL BALANCE:	Within 3 dB FROM 0 TO -40 dB
14. FADER KILL: (EQ FLAT, UNITY GAIN, FX OFF, W/20 kHz LPF, A-WEIGHTED, MASTER = +14 dBV OUTPUT)
Channel Fader:	More than 75 dB at 1 kHz
Crossfader:	More than 75 dB at 1 kHz
15. ACCESSORIES:
User Manual	1 pc
AC Power Supply	1 pc

11