Stanton user manual M.203 Description Rear Panel Figure

M.203 Description (Rear Panel)

3.3M.203 Description - Rear Panel (Figure 3.3)

Figure 3.3

1.Power Switch: Turns the mixer ON or OFF.

2.DC IN: Input connection for the included power supply. While the power is switched OFF, plug the power supply into the mixer first, and then plug it into the outlet. Only use the supplied or official replacement Stanton® power supply.

3.Unbalanced Master output: RCA connectors are typically used to connect to a home stereo, or to another mixer with RCA inputs for practicing or team routines.

4.REC: The record output is not affected by the Master volume control. It can be used to record to a computer, CD, MD, & tape recorder, even while the master volume is turned down.

5.Line Inputs: Unbalanced RCA jacks for connecting stereo audio from line level sources such as CD players, Hi-Fi VCRs, cassette decks, DAT machines, laser discs, tuners, Mini Discs, even synthesizers or other mixing consoles. Plug mono audio sources into both Left and Right inputs using a "Y" cable connector.

6.Line/Phono Inputs: Unbalanced RCA jacks for connecting stereo audio from sources such as Turntables, CD players,

Hi-Fi VCRs, cassette decks, DAT machines, laser discs, even synthesizers or other mixing consoles. When connecting a turntable, make sure the switch labeled “Ph/Line” is switched to “Phono”. When connecting a Line/Level source, make sure the switch is turned to “Line”

7.Line/Phono Input Switch: This switch activates the Phono Preamp on the Line/Phono input for use with Turntables.

8.ground connector: To eliminate electrical hum, connect the ground cable from your standard turntable ground post to the M.203 ground terminal. Some turntables (like the Stanton STR8.150) do not require grounding wire.

9.Fader Start: To use this function you need a CD player with the Fader Start feature and its related cable so you can use the Crossfader to start and stop the CD player. The Fader Start switch (Front Panel, Figure 3.1, 3) activates the Fader Start feature. When the Fader Start switch is in the ON position, this function allows the fader to activate or return to the preset Cue Point on your compatible CD Player.

10.Microphone Input (Mic): Connect a standard unbalanced (1/4") microphone.

6