Making Connections
Outputs
Use the REC output to connect a stand-alone CD recorder, DAT recorder, or tape deck. Use the BOOTH output to connect directly to powered monitors or your monitor amp. The ZONE output can be used if you need separate level control for a particular area of your club, such as lounge vs. dance floor.
Master
These outputs are for connecting your main power amp, EQ, crossover, etc. Both RCA and 1/4-inch jacks are provided. Using the Master Output Trim control, you can adjust the overall level being sent from the outputs—great when an additional boost or cut is needed.
Power Adapter Inlet
Connect the RM.402’s power supply here. Screw to the right, unscrew to the left. You knew that, didn’t you?
Ground Terminals
Connect the grounding cables from your turntables here to avoid hum.
