decrease or increase when button is pressing and returns to the original pitch when the button is released.
25. BEAT |
| Via the BEAT SYNC |
buttons you can adjust the tempo(time) of the FX. | ||
There | are 6 | |
1/4,1/2,3/4,1/1,2/1 and 4/1. |
| |
26.JOG WHEEL This wheel has three functions:
1.The jog wheel will act as a frame search control when the CD in the pause or cue mode, allowing you to set a point.
2.The wheel also works as a pitch bend during playback. Turning the wheel clockwise will increase the pitch percentage up to 100%, and turning the wheel in the
3.The jog wheel also controls the FX functions including
27.CD LED This LED is illuminated when the CD tray is empty.
FX SEL.
SCRATCH | FILTER | ECHO | TRANS |
| HOLD |
| REVERSE |
SKID | PHASE | FLANGER | PAN |
28 | 29 | 30 | 31 | 32 | 33 | 34 |
28.FX SEL. BUTTON This arrow is used to select
the list/row of FXs to activate. Press the arrow button to select the between SCRATCH/FILTER/ECHO/ TRANS and SKID/PHASE/FLANGER/PAN; to
activate press the FX SEL buttons. The LED above the FX SEL. button will indicate which FX is currently selected.
29. SCRATCH/SKID BUTTON This button is used to activate and deactivate the SCRATCH effect, when the FX SEL.LED is green. This button is used to activate and deactivate the SKID effect, when the FX SEL. LED is blue. When SCRATCH or SKID effect is activated, you can tune the TIME PARAMETER button to adjust the start time and tune the RATIO PARAMETER to adjust the stop time. If you want to fine adjust the time parameters, you can press TIME PARAMETER or RATIO PARAMETER button then rotate the JOG wheel. Hold the button to active scratch cue function and SCRATCH LED is red.
SCRATCH CUE
IN PLAYBACK MODE:
While in play mode and when the touch sensitivity function is active, the JOG WHEEL can be used to return the unit to last cue point. To activate this mode press and hold the Scratch FX button. Once in scratch cue mode simply touch the JOG WHEEL and unit will immediately return to the last set cue point and playback without music interruption.
IN CUE MODE:
While in cue mode and when the touch sensitivity function is active, tapping on the JOG WHEEL can be used to start playback. The unit will continue to
playback until the JOG WHEEL is released. One the JOG WHEEL is released the unit will return to the last point.
30. FILTER/PHASE BUTTON This button is used to activate and deactivate the FILTER effect, when the FX SEL. LED is green. This button is used to activate and deactivate the PHASE effect, when the FX SEL. LED is blue. The TIME PARAMETER button is used to adjust the FILTER/PHASE effect’s scan time in
31.HOLD BUTTON This button allows you to set and lock any new parameters you set to the FX. This button will glow red when the hold function is activated. If the hold function is not selected any changes to the effect parameters will be momentary.
32.ECHO/FLANGER BUTTON – This button is used to activate and deactivate the ECHO effect, when the FX SEL. LED is green. This button is used to activate and deactivate the FLANGER effect, when the FX SEL. LED is blue. The TIME PARAMETER button is used to adjust the ECHO/FLANGER effect’s scan time in
is used adjust the ECHO/FLANGER effect’s frequency sweeping range.
33. TRANS/PAN BUTTON This button is used to
activate and deactivate the TRANS effect, when the FX SEL. LED is green. This button is used to activate and deactivate the PAN effect, when the FX SEL. LED is blue. The TIME PARAMETER button is used to adjust the TRANS/PAN effect’s scan time in mini- second. The RATIO PARAMETER button is used to adjust the TRANS/PAN effect’s frequency sweeping
range. | This button activates |
34. REVERSE BUTTON |
reverse play mode. This function will play your track or sampler in reverse.
