Stanton S.550 Time display, Matching the Beats Per Minute BPM, Program play, Loop Play, Time Time

OPERATIONS

10. Time display

Press TIME button to select time display mode:

TIME

TIME

11. Matching the Beats Per Minute (BPM)

There are two tools available for matching the BPM of the two CDs:

cUse the pitch slider to adjust the BPM satirically. d Turn the JOG dial to change the BPM temporarily.

TIME

1)Pitch Slider

nTo adjust the BPM by sliding the pitch slider up or down, press the PITCH button to turn on the PITCH adjustment function before using.

oSlide the pitch slider up to decrease BPM, or down to increase BPM.

2)Turn the JOG dial

Turn the jog dial clockwise during play to increase the BMP in the forward direction, counterclockwise to decrease the BMP in the reverse direction. The faster you turn the wheel, the more the BMP changes. The BMP changes with a range of +/-16%.

When you release jog wheel, the CD will return to the tempo indicated by the pitch slider.

CD1 bass beat

CD2 bass beat

Bass beat

Bass beat

12. Program play

nPress the PROGRAM button, the player will enter the program mode and the CD will stop rotating.

oSelect the desired track by pressing the SKIP button, then press the PROGRAM button again. The selected

track will be added to the program sequence.

p Repeat step 2 operation. A maximum of 20 tracks can be programmed at one time. q Press the PLAY/PAUSE button to start the program play from the first selection. r Press the program button again during program play to stop play.

s Press and hold the program button more than 2 seconds to cancel the program mode and erase all the current program contents.

13.Loop Play

nPress the IN button to set the loop start point A, the LOOP indicator will flashes on the LCD.

oPress the OUT button to set the loop end point B, after the B point is set, the playback will enter the loop play from A to B repeatedly.

pPress the RELOOP button, the loop play function is canceled, the LOOP indicator goes out.

14. Fader start

You have the possibility to start the respective CD-player directly from the mixer. Make sure that the Control socket is connected with the respective socket on the mixer. Additionally, the Audio out socket have to be connected with the Line-input sockets of your mixer. Please note that the Fader start function only works with the appropriate mixers. Insert the CD and select the desired track. Start playback from your mixer.

9