Stanton SA-8 C H N I C a L S P E C I F I C AT I O N S, E a S E Read C a R E F U L L Y Befo RE USE

Thank you for making Stanton your first choice in professional DJ mixers.

This innovative family of mixers has been developed with input from the professional DJ community, bringing to the marketplace a previously unavailable, affordable combination of user-friendly, functional design, rugged construction, and professional quality features.

Stanton and your authorized Stanton dealer are dedicated to your complete satisfaction by offering benchmark service and support throughout the long life of your Stanton product.

Again, we appreciate your patronage, and look forward to many years of making music together.

P L E A S E READ C A R E F U L L Y BEFO RE USE

FAILURE TO FOLLOW THE INSTRUCTIONS PRINTED BELOW MAY VOID WARRANTY

•Follow all security advice printed on your mixer

•When removing the unit's AC plug from the power source, grasp and pull the plug, NEVER the cord itself!

•Avoid placing your mixer near heat sources, such as power amplifiers.

•When in use, place your mixer on a stable surface, away from vibration. Always use care when carrying your mixer. Impact, or heavy vibration may compromise the unit's mechanical integrity. The manufacturer is not responsible for damage resulting from an impact, or misuse.

•When in use, place your mixer away from sources of hum or noise, such as transformers, or electric motors.

•To prevent overheating, always provide your mixer with adequate ventilation air space.

•Avoid stepping on your mixer's AC cord. Repeated compression of the cord may lead to electrical shorting.

•To avoid damage due to AC voltage peaks, always disconnect your mixer from the power source during electrical storms. If possible connect mixer to a surge protector.

•Your mixer contains no user-serviceable parts. The manufacturer is not responsible for any damage or personal injury resulting from unauthorized user-servicing or modifications. In addition, the warranty will be void if any unauthorized service by the user is detected. Always return your mixer to an authorized Stanton dealer for servicing.

T E C H N I C A L S P E C I F I C AT I O N S

Line inputs:	2	(RCA) x 2 channels, -10 dBV / 37 kOhm
Phono inputs:	2	(RCA) x 2 channels, -50 dBV / 47 kOhm
Aux inputs:	2	(RCA) -10 dBV /22 kOhm
Return inputs:	2	(1/4"), -10 dBV / 22 kOhm
Send output:	2 (1/4"), -10 dBV
Master output:	2	(1/4") Balanced /(RCA) unbalanced,
	+4 dBu balanced / -10 dBV unbalanced
Program outputs:	2	(1/4")balanced x 2 channels, +4 dBu / 100 Ohms
Booth output:	2	(RCA), -10 dBV / 100 Ohms
Headphone output:	2	(1/4 inch), greater than 32 Ohm load
Frequency Response:	20 Hz - 20 kHz, + 1/-2 dB
Tone Control :	+ 9/-20 dB (Hi, Mid, Low)
Max Gain:	14 dB
S/N Ratio:	Better than 100 dB (ref: max input level)
T.H.D:	Less than 0.05% (1 kHz)
Dimension(LxWxD):	12.6" x 9.25" x 4.72" (320mm x 235mm x 120mm)
Weight:	7.3 Lbs (3.3 kgs)