Star Micronics PR921-24-A

– 20 –

• Paper thickness: Min. 0.10 to Max. 0.15 mm. (See Figure 8-4)

1) Fasten the shaft with the left and right hooks positioned on the Paper Holder.

2) Check that the shaft is securely fastened to the Paper Holder hooks to set it.

Note 1: The 2 positions of the Paper Holder should be adjusted for the thickness of the record-

ing paper, the length thereof and the environment of use.

Note 2: The loop guide is not used, so store it so that it will not get lost.

Paper Holder

Hook Hook

Shaft

Figure 8-4

Contents

Main Page CONTENTS Page Page 3. PAPER SPECIFICATIONS (HEAT SENSITIVE PAPER) 4. PRESENTER SPECIFICATIONS Page Page Page * Soldering Time: Within 5 seconds Electrical Characteristics (at 25C) *1: No reflective material. *2: D is the thickness of the reflective mirror glass. Page Page 11 4.5.2 Example Circuit Note: Parts marked with an asterisk are not mounted. VM Page Figure 5-1 Unit: mm 13 Page 6. AMBIENT SPECIFICATIONS 7. RELIABILITY SPECIFICATIONS 8. SETTING PAPER AND USING THE ACCESSORIES Page Page Page 9. RECOVERING FROM ERRORS (PAPER JAMS) Right sideLeft side 10. PRECAUTIONS REGARDING OUTER COVER DESIGNS * * Page 11. MAINTENANCE Left side Right side 12. HANDLING THE PRESENTER Page Distributed by